buildroot raspberrypi3_defconfig

Question

buildroot raspberrypi3_defconfig

a marqué ce sujet comme résolu.

ox223252, mardi 07 mai 2019 à 13h09

Bonjour,

Je me trouve confronté à un truc que je n’arrive pas à resoudre (sinon je serais pas là ). Je compile une image pour raspberrypi 3 depuis le fichier de configuration par defaut. Une fois la compilation effectué et l’image copié, mon interface eth0 n’a pas toujours d’adresse IP au boot.

voila mes commandes :

~/> mkdir nTest_O
~/> cd nTest_O
~/nTest_O/> make -C ../buildroot O=$(pwd) menuconfig
~/nTest_O/> make raspberrypi3_defconfig
~/nTest_O/> make
...
...
~/nTest_O/> sudo cp images/sdcard.img /dev/sdb

et quand je boot :

parfois j’ai une adresse IP mais très souvent non :

eth0      Link encap:Ethernet  HWaddr B8:27:EB:3A:75:C2  
         inet6 addr: fe80::ba27:ebff:fe3a:75c2/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:703 errors:0 dropped:0 overruns:0 frame:0
         TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000 
         RX bytes:51354 (50.1 KiB)  TX bytes:796 (796.0 B)

lo        Link encap:Local Loopback  
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:65536  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000 
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Voici les message de boot :

Jan  1 00:00:02 buildroot syslog.info syslogd started: BusyBox v1.29.3
Jan  1 00:00:02 buildroot kern.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-07 11:37:40 CEST)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000] Linux version 4.14.95-v7 (psauleau@DevServer) (gcc version 7.4.0 (Buildroot 2019.05-git-00289-gd88a6fa9a9-dirty)) #1 SMP Tue May 7 11:47:25 CEST 2019
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] CPU: div instructions available: patching division code
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] Memory policy: Data cache writealloc
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] cma: Reserved 8 MiB at 0x39400000
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.000000] On node 0 totalpages: 236544
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80c85680, node_mem_map b8bd5000
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.000000]   Normal zone: 2079 pages used for memmap
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.000000]   Normal zone: 236544 pages, LIFO batch:31
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] percpu: Embedded 17 pages/cpu @b8b7d000 s38668 r8192 d22772 u69632
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.000000] pcpu-alloc: s38668 r8192 d22772 u69632 alloc=17*4096
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 234465
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=tt
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] Memory: 915868K/946176K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 22116K reserved, 8192K cma-reserved)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000] Virtual kernel memory layout:
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000]     vmalloc : 0xba000000 - 0xff800000   (1112 MB)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000]     lowmem  : 0x80000000 - 0xb9c00000   ( 924 MB)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000]       .text : 0x80008000 - 0x80800000   (8160 kB)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000]       .init : 0x80b00000 - 0x80c00000   (1024 kB)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000]       .data : 0x80c00000 - 0x80c9063c   ( 578 kB)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.000000]        .bss : 0x80c98048 - 0x80d46860   ( 699 kB)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] ftrace: allocating 25246 entries in 75 pages
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 52ns
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000293] Console: colour dummy device 80x30
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000828] console [tty1] enabled
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000867] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.000907] pid_max: default: 32768 minimum: 301
Jan  1 00:00:02 buildroot kern.info kernel: [    0.001220] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.001253] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.002201] Disabling memory control group subsystem
Jan  1 00:00:02 buildroot kern.info kernel: [    0.002292] CPU: Testing write buffer coherency: ok
Jan  1 00:00:02 buildroot kern.info kernel: [    0.002708] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Jan  1 00:00:02 buildroot kern.info kernel: [    0.003126] Setting up static identity map for 0x100000 - 0x10003c
Jan  1 00:00:02 buildroot kern.info kernel: [    0.003267] Hierarchical SRCU implementation.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.003957] smp: Bringing up secondary CPUs ...
Jan  1 00:00:02 buildroot kern.info kernel: [    0.004703] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Jan  1 00:00:02 buildroot kern.info kernel: [    0.005492] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Jan  1 00:00:02 buildroot kern.info kernel: [    0.006269] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Jan  1 00:00:02 buildroot kern.info kernel: [    0.006373] smp: Brought up 1 node, 4 CPUs
Jan  1 00:00:02 buildroot kern.info kernel: [    0.006446] SMP: Total of 4 processors activated (153.60 BogoMIPS).
Jan  1 00:00:02 buildroot kern.info kernel: [    0.006467] CPU: All CPU(s) started in HYP mode.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.006486] CPU: Virtualization extensions available.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.007429] devtmpfs: initialized
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.017224] random: get_random_u32 called from bucket_table_alloc+0x120/0x24c with crng_init=0
Jan  1 00:00:02 buildroot kern.info kernel: [    0.017737] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
Jan  1 00:00:02 buildroot kern.info kernel: [    0.017975] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Jan  1 00:00:02 buildroot kern.info kernel: [    0.018019] futex hash table entries: 1024 (order: 4, 65536 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.018600] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:02 buildroot kern.info kernel: [    0.019346] NET: Registered protocol family 16
Jan  1 00:00:02 buildroot kern.info kernel: [    0.021788] DMA: preallocated 1024 KiB pool for atomic coherent allocations
Jan  1 00:00:02 buildroot kern.info kernel: [    0.026350] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.026383] hw-breakpoint: maximum watchpoint size is 8 bytes.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.026585] Serial: AMBA PL011 UART driver
Jan  1 00:00:02 buildroot kern.info kernel: [    0.028207] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
Jan  1 00:00:02 buildroot kern.info kernel: [    0.028662] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
Jan  1 00:00:02 buildroot kern.info kernel: [    0.058899] bcm2835-dma 3f007000.dma: DMA legacy API manager at ba013000, dmachans=0x1
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.060443] SCSI subsystem initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.060678] usbcore: registered new interface driver usbfs
Jan  1 00:00:02 buildroot kern.info kernel: [    0.060753] usbcore: registered new interface driver hub
Jan  1 00:00:02 buildroot kern.info kernel: [    0.060854] usbcore: registered new device driver usb
Jan  1 00:00:02 buildroot kern.info kernel: [    0.070076] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-01-22 16:50
Jan  1 00:00:02 buildroot kern.info kernel: [    0.071238] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.153953] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:02 buildroot kern.info kernel: [    0.154063] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.154264] FS-Cache: Loaded
Jan  1 00:00:02 buildroot kern.info kernel: [    0.154477] CacheFiles: Loaded
Jan  1 00:00:02 buildroot kern.info kernel: [    0.163240] NET: Registered protocol family 2
Jan  1 00:00:02 buildroot kern.info kernel: [    0.163959] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.164088] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.164291] TCP: Hash tables configured (established 8192 bind 8192)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.164436] UDP hash table entries: 512 (order: 2, 16384 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.164498] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.164734] NET: Registered protocol family 1
Jan  1 00:00:02 buildroot kern.info kernel: [    0.165208] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.165232] RPC: Registered udp transport module.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.165252] RPC: Registered tcp transport module.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.165271] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.166308] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
Jan  1 00:00:02 buildroot kern.info kernel: [    0.168996] workingset: timestamp_bits=14 max_order=18 bucket_order=4
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.176937] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.177552] NFS: Registering the id_resolver key type
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.177599] Key type id_resolver registered
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.177619] Key type id_legacy registered
Jan  1 00:00:02 buildroot kern.info kernel: [    0.177648] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan  1 00:00:02 buildroot kern.info kernel: [    0.179542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.179695] io scheduler noop registered
Jan  1 00:00:02 buildroot kern.info kernel: [    0.179717] io scheduler deadline registered
Jan  1 00:00:02 buildroot kern.info kernel: [    0.179900] io scheduler cfq registered (default)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.179922] io scheduler mq-deadline registered
Jan  1 00:00:02 buildroot kern.info kernel: [    0.179943] io scheduler kyber registered
Jan  1 00:00:02 buildroot kern.info kernel: [    0.182240] BCM2708FB: allocated DMA memory f9500000
Jan  1 00:00:02 buildroot kern.info kernel: [    0.182285] BCM2708FB: allocated DMA channel 0 @ ba013000
Jan  1 00:00:02 buildroot kern.info kernel: [    0.226849] Console: switching to colour frame buffer device 210x65
Jan  1 00:00:02 buildroot kern.info kernel: [    0.251512] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
Jan  1 00:00:02 buildroot kern.info kernel: [    0.253163] bcm2835-rng 3f104000.rng: hwrng registered
Jan  1 00:00:02 buildroot kern.info kernel: [    0.253419] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.254080] vc-sm: Videocore shared memory driver
Jan  1 00:00:02 buildroot kern.info kernel: [    0.254469] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
Jan  1 00:00:02 buildroot kern.info kernel: [    0.264171] brd: module loaded
Jan  1 00:00:02 buildroot kern.info kernel: [    0.273109] loop: module loaded
Jan  1 00:00:02 buildroot kern.info kernel: [    0.273231] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:02 buildroot kern.info kernel: [    0.274026] libphy: Fixed MDIO Bus: probed
Jan  1 00:00:02 buildroot kern.info kernel: [    0.274240] usbcore: registered new interface driver lan78xx
Jan  1 00:00:02 buildroot kern.info kernel: [    0.274437] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:02 buildroot kern.info kernel: [    0.274592] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.302634] dwc_otg 3f980000.usb: base=0xf0980000
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.502960] Core Release: 2.80a
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.503054] Setting default values for core params
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.503200] Finished setting default values for core params
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.703587] Using Buffer DMA mode
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.703681] Periodic Transfer Interrupt Enhancement - disabled
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.703825] Multiprocessor Interrupt Enhancement - disabled
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.703965] OTG VER PARAM: 0, OTG VER FLAG: 0
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.704085] Dedicated Tx FIFOs mode
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.704552] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb9514000 dma = 0xf9514000 len=9024
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.704803] FIQ FSM acceleration enabled for :
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.704803] Non-periodic Split Transactions
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.704803] Periodic Split Transactions
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.704803] High-Speed Isochronous Endpoints
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.704803] Interrupt/Control Split Transaction hack enabled
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.705299] dwc_otg: Microframe scheduler enabled
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.705347] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805f06e8
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.705495] WARN::hcd_init_fiq:460: FIQ ASM at 0x805f0a44 length 36
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.705656] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
Jan  1 00:00:02 buildroot kern.info kernel: [    0.712043] dwc_otg 3f980000.usb: DWC OTG Controller
Jan  1 00:00:02 buildroot kern.info kernel: [    0.718353] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
Jan  1 00:00:02 buildroot kern.info kernel: [    0.724693] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.730983] Init: Port Power? op_state=1
Jan  1 00:00:02 buildroot kern.warn kernel: [    0.737205] Init: Power Port (0)
Jan  1 00:00:02 buildroot kern.info kernel: [    0.743535] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan  1 00:00:02 buildroot kern.info kernel: [    0.749760] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:02 buildroot kern.info kernel: [    0.755969] usb usb1: Product: DWC OTG Controller
Jan  1 00:00:02 buildroot kern.info kernel: [    0.762184] usb usb1: Manufacturer: Linux 4.14.95-v7 dwc_otg_hcd
Jan  1 00:00:02 buildroot kern.info kernel: [    0.768419] usb usb1: SerialNumber: 3f980000.usb
Jan  1 00:00:02 buildroot kern.info kernel: [    0.775300] hub 1-0:1.0: USB hub found
Jan  1 00:00:02 buildroot kern.info kernel: [    0.781615] hub 1-0:1.0: 1 port detected
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.788281] dwc_otg: FIQ enabled
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.788286] dwc_otg: NAK holdoff enabled
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.788291] dwc_otg: FIQ split-transaction FSM enabled
Jan  1 00:00:02 buildroot kern.debug kernel: [    0.788300] Module dwc_common_port init
Jan  1 00:00:02 buildroot kern.info kernel: [    0.788536] usbcore: registered new interface driver usb-storage
Jan  1 00:00:02 buildroot kern.info kernel: [    0.794904] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:02 buildroot kern.info kernel: [    0.801122] IR NEC protocol handler initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.807229] IR RC5(x/sz) protocol handler initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.813373] IR RC6 protocol handler initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.819473] IR JVC protocol handler initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.825538] IR Sony protocol handler initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.831584] IR SANYO protocol handler initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.837564] IR Sharp protocol handler initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.843418] IR MCE Keyboard/mouse protocol handler initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.849326] IR XMP protocol handler initialized
Jan  1 00:00:02 buildroot kern.info kernel: [    0.855918] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
Jan  1 00:00:02 buildroot kern.info kernel: [    0.862247] bcm2835-cpufreq: min=600000 max=1400000
Jan  1 00:00:02 buildroot kern.info kernel: [    0.868647] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:02 buildroot kern.info kernel: [    0.874797] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:02 buildroot kern.info kernel: [    0.881289] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
Jan  1 00:00:02 buildroot kern.info kernel: [    0.887856] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
Jan  1 00:00:02 buildroot kern.info kernel: [    0.894318] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:02 buildroot kern.info kernel: [    0.902004] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:02 buildroot kern.info kernel: [    0.908361] hidraw: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:02 buildroot kern.info kernel: [    0.914754] usbcore: registered new interface driver usbhid
Jan  1 00:00:02 buildroot kern.info kernel: [    0.920902] usbhid: USB HID core driver
Jan  1 00:00:02 buildroot kern.info kernel: [    0.927580] vchiq: vchiq_init_state: slot_zero = b9580000, is_master = 0
Jan  1 00:00:02 buildroot kern.info kernel: [    0.935309] [vc_sm_connected_init]: start
Jan  1 00:00:02 buildroot kern.info kernel: [    0.945270] [vc_sm_connected_init]: end - returning 0
Jan  1 00:00:02 buildroot kern.info kernel: [    0.952020] Initializing XFRM netlink socket
Jan  1 00:00:02 buildroot kern.info kernel: [    0.958106] NET: Registered protocol family 17
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.964292] Key type dns_resolver registered
Jan  1 00:00:02 buildroot kern.notice kernel: [    0.970655] Registering SWP/SWPB emulation handler
Jan  1 00:00:02 buildroot kern.info kernel: [    0.977327] registered taskstats version 1
Jan  1 00:00:02 buildroot kern.info kernel: [    0.989046] uart-pl011 3f201000.serial: cts_event_workaround enabled
Jan  1 00:00:02 buildroot kern.info kernel: [    0.995378] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
Jan  1 00:00:02 buildroot kern.info kernel: [    2.017673] console [ttyAMA0] enabled
Jan  1 00:00:02 buildroot kern.info kernel: [    2.029271] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 166, base_baud = 50000000) is a 16550
Jan  1 00:00:02 buildroot kern.info kernel: [    2.044929] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
Jan  1 00:00:02 buildroot kern.info kernel: [    2.057163] mmc-bcm2835 3f300000.mmc: DMA channel allocated
Jan  1 00:00:02 buildroot kern.warn kernel: [    2.069624] Indeed it is in host mode hprt0 = 00021501
Jan  1 00:00:02 buildroot kern.notice kernel: [    2.169319] random: fast init done
Jan  1 00:00:02 buildroot kern.info kernel: [    2.179233] sdhost: log_buf @ b9513000 (f9513000)
Jan  1 00:00:02 buildroot kern.warn kernel: [    2.223221] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 00:00:02 buildroot kern.warn kernel: [    2.236524] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:02 buildroot kern.warn kernel: [    2.249795] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:02 buildroot kern.warn kernel: [    2.264212] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 00:00:02 buildroot kern.info kernel: [    2.275828] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Jan  1 00:00:02 buildroot kern.info kernel: [    2.288489] of_cfs_init
Jan  1 00:00:02 buildroot kern.info kernel: [    2.297099] of_cfs_init: OK
Jan  1 00:00:02 buildroot kern.info kernel: [    2.306283] uart-pl011 3f201000.serial: no DMA platform data
Jan  1 00:00:02 buildroot kern.info kernel: [    2.307679] usb 1-1: new high-speed USB device number 2 using dwc_otg
Jan  1 00:00:02 buildroot kern.info kernel: [    2.324711] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:02 buildroot kern.warn kernel: [    2.330965] Indeed it is in host mode hprt0 = 00001101
Jan  1 00:00:02 buildroot kern.warn kernel: [    2.459409] mmc0: host does not support reading read-only switch, assuming write-enable
Jan  1 00:00:02 buildroot kern.info kernel: [    2.477527] mmc0: new high speed SDHC card at address 0007
Jan  1 00:00:02 buildroot kern.info kernel: [    2.490036] mmcblk0: mmc0:0007 SD32G 29.0 GiB
Jan  1 00:00:02 buildroot kern.info kernel: [    2.503383]  mmcblk0: p1 p2
Jan  1 00:00:02 buildroot kern.info kernel: [    2.524035] mmc1: new high speed SDIO card at address 0001
Jan  1 00:00:02 buildroot kern.info kernel: [    2.528574] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:02 buildroot kern.info kernel: [    2.550268] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:02 buildroot kern.info kernel: [    2.565191] devtmpfs: mounted
Jan  1 00:00:02 buildroot kern.info kernel: [    2.577846] Freeing unused kernel memory: 1024K
Jan  1 00:00:02 buildroot kern.info kernel: [    2.591534] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
Jan  1 00:00:02 buildroot kern.info kernel: [    2.604712] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan  1 00:00:02 buildroot kern.info kernel: [    2.619224] hub 1-1:1.0: USB hub found
Jan  1 00:00:02 buildroot kern.info kernel: [    2.629613] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:02 buildroot kern.info kernel: [    2.691501] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
Jan  1 00:00:02 buildroot kern.notice kernel: [    2.788978] random: dd: uninitialized urandom read (512 bytes read)
Jan  1 00:00:02 buildroot kern.info kernel: [    2.951286] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Jan  1 00:00:03 buildroot kern.info kernel: [    3.011815] NET: Registered protocol family 10
Jan  1 00:00:03 buildroot kern.info kernel: [    3.023896] Segment Routing with IPv6
Jan  1 00:00:03 buildroot kern.info kernel: [    3.091604] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
Jan  1 00:00:03 buildroot kern.info kernel: [    3.105316] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan  1 00:00:03 buildroot kern.info kernel: [    3.120019] hub 1-1.1:1.0: USB hub found
Jan  1 00:00:03 buildroot kern.info kernel: [    3.130685] hub 1-1.1:1.0: 3 ports detected
Jan  1 00:00:03 buildroot kern.info kernel: [    3.241271] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
Jan  1 00:00:03 buildroot kern.info kernel: [    3.406590] usb 1-1.2: New USB device found, idVendor=413c, idProduct=2113
Jan  1 00:00:03 buildroot kern.info kernel: [    3.420115] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Jan  1 00:00:03 buildroot kern.info kernel: [    3.434045] usb 1-1.2: Product: Dell KB216 Wired Keyboard
Jan  1 00:00:03 buildroot kern.info kernel: [    3.462727] input: Dell KB216 Wired Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2113.0001/input/input0
Jan  1 00:00:03 buildroot kern.info kernel: [    3.551949] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3f980000.usb-1.2/input0
Jan  1 00:00:03 buildroot kern.info kernel: [    3.583136] input: Dell KB216 Wired Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:413C:2113.0002/input/input1
Jan  1 00:00:03 buildroot kern.info kernel: [    3.671468] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3f980000.usb-1.2/input1
Jan  1 00:00:03 buildroot kern.info kernel: [    3.941268] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg
Jan  1 00:00:04 buildroot kern.info kernel: [    4.081762] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
Jan  1 00:00:04 buildroot kern.info kernel: [    4.096174] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan  1 00:00:04 buildroot kern.info kernel: [    4.376027] libphy: lan78xx-mdiobus: probed
Jan  1 00:00:04 buildroot kern.notice kernel: [    4.494956] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
Jan  1 00:00:05 buildroot kern.info kernel: [    5.084064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan  1 00:00:05 buildroot kern.notice kernel: [    5.131484] random: mktemp: uninitialized urandom read (6 bytes read)
Jan  1 00:00:08 buildroot kern.notice kernel: [    8.851225] random: crng init done
Jan  1 00:00:14 buildroot daemon.info : starting pid 130, tty '/dev/console': '/sbin/getty -L  console 0 vt100 '
Jan  1 00:00:14 buildroot daemon.info : starting pid 131, tty '/dev/tty1': '/sbin/getty -L  tty1 0 vt100 '
Jan  1 00:00:17 buildroot auth.info login[131]: root login on 'tty1'
Jan  1 00:00:26 buildroot kern.info kernel: [   26.595167] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

j’utilise cette version de buildroot :

repot : git://git.buildroot.net/buildroot
commit : d88a6fa9a96c6af46c847c8b5935a839fd9268af

Je voulais savoir si quelqu’un sait de quoi ça vient et comment corriger ça ?

07/05/19 à 13h09

+0 -0

ache, mardi 07 mai 2019 à 17h44

Coucou \o,

Ton IP auto-configuré est fe80::ba27:ebff:fe3a:75c2.

Peux-tu expliciter ce que tu souhaites ? Parfois, tu n’obtiens pas cette IP auto-configurée ? Tu souhaites une IPv4 ? Si oui, de manière statique ou dynamique ?

07/05/19 à 17h44

ache.one 🦹 👾 🦊

+0 -0

ox223252, jeudi 09 mai 2019 à 07h41
Modifié

Bonjour, Effectivement j’ai pas précisé mais c’est bien une IPv4 dynamique que je souhaite et que je n’obtiens pas à chaque fois.

L’IPv6, il me semble l’obtenir à chaque fois, même si parfois c’est un peut long (20–25s).

Si vous voulez tout savoir je ne comprend pas pourquoi parfois je l’ai et parfois non, je ne comprend pas d’ou vient ce comportement.

09/05/19 à 07h41
Modifié

+0 -0

ache, jeudi 09 mai 2019 à 09h33
Modifié

Pour obtenir une adresse IPv4 dynamique. La Raspberry doit être connectée à un serveur DHCP puis elle doit lancer une requête d’IPv4.

Il ne me semble pas qu’il y ai d’autre méthode pour obtenir une adresse IPv4 dynamiquement. Bien-sûr, la Raspberry peut héberger son propre serveur DHCP mais son adresse doit être configurer statiquement.

Edit: Souvent le serveur DHCP est la box.

09/05/19 à 09h33
Modifié

ache.one 🦹 👾 🦊

+0 -0

ox223252, jeudi 09 mai 2019 à 10h06
Modifié

ça je sais bien , ce qui me pose problème c’est pk elle ne lance pas de requette à chaque fois ou qu’elle ne prend pas en compte la réponse, car le DHCP est bien présent.

09/05/19 à 10h06
Modifié

+0 -0

ache, jeudi 09 mai 2019 à 10h34

Donc c’est ta box qui est le serveur DHCP ?

Tu as tout plein d’option dans le fichier : busybox.config

D’ailleurs une de ces options te renvoie vers le scripts udhcpc.script.

Donne nous un maximum d’information !
D’ailleurs, c’est bien le résultat de la commande ip a que tu nous a donné dans ton premier message ?

09/05/19 à 10h34

ache.one 🦹 👾 🦊

+0 -0

ox223252, jeudi 09 mai 2019 à 11h54

Pour info, c’est la configuration de base de buildroot pour le raspberry pi 3. Je n’ai fait aucune modification .

C’est un serveur DHCP autre (mais fonctionnel).

le fichier busybox.config :

#
# Automatically generated make config: don't edit
# Busybox version: 1.28.0
# Wed Feb  7 09:44:57 2018
#
CONFIG_HAVE_DOT_CONFIG=y

#
# Settings
#
CONFIG_DESKTOP=y
# CONFIG_EXTRA_COMPAT is not set
# CONFIG_FEDORA_COMPAT is not set
CONFIG_INCLUDE_SUSv2=y
CONFIG_LONG_OPTS=y
CONFIG_SHOW_USAGE=y
CONFIG_FEATURE_VERBOSE_USAGE=y
# CONFIG_FEATURE_COMPRESS_USAGE is not set
CONFIG_LFS=y
# CONFIG_PAM is not set
CONFIG_FEATURE_DEVPTS=y
CONFIG_FEATURE_UTMP=y
CONFIG_FEATURE_WTMP=y
# CONFIG_FEATURE_PIDFILE is not set
CONFIG_PID_FILE_PATH=""
CONFIG_BUSYBOX=y
CONFIG_FEATURE_INSTALLER=y
# CONFIG_INSTALL_NO_USR is not set
CONFIG_FEATURE_SUID=y
# CONFIG_FEATURE_SUID_CONFIG is not set
# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
# CONFIG_FEATURE_PREFER_APPLETS is not set
CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
# CONFIG_SELINUX is not set
# CONFIG_FEATURE_CLEAN_UP is not set
CONFIG_FEATURE_SYSLOG=y
CONFIG_PLATFORM_LINUX=y

#
# Build Options
#
# CONFIG_STATIC is not set
# CONFIG_PIE is not set
# CONFIG_NOMMU is not set
# CONFIG_BUILD_LIBBUSYBOX is not set
# CONFIG_FEATURE_LIBBUSYBOX_STATIC is not set
# CONFIG_FEATURE_INDIVIDUAL is not set
# CONFIG_FEATURE_SHARED_BUSYBOX is not set
CONFIG_CROSS_COMPILER_PREFIX=""
CONFIG_SYSROOT=""
CONFIG_EXTRA_CFLAGS=""
CONFIG_EXTRA_LDFLAGS=""
CONFIG_EXTRA_LDLIBS=""
# CONFIG_USE_PORTABLE_CODE is not set

#
# Installation Options ("make install" behavior)
#
CONFIG_INSTALL_APPLET_SYMLINKS=y
# CONFIG_INSTALL_APPLET_HARDLINKS is not set
# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
# CONFIG_INSTALL_APPLET_DONT is not set
# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
CONFIG_PREFIX="./_install"

#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_PESSIMIZE is not set
# CONFIG_DEBUG_SANITIZE is not set
# CONFIG_UNIT_TEST is not set
# CONFIG_WERROR is not set
CONFIG_NO_DEBUG_LIB=y
# CONFIG_DMALLOC is not set
# CONFIG_EFENCE is not set

#
# Library Tuning
#
# CONFIG_FEATURE_USE_BSS_TAIL is not set
CONFIG_FEATURE_RTMINMAX=y
CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
CONFIG_PASSWORD_MINLEN=6
CONFIG_MD5_SMALL=1
CONFIG_SHA3_SMALL=1
# CONFIG_FEATURE_FAST_TOP is not set
# CONFIG_FEATURE_ETC_NETWORKS is not set
CONFIG_FEATURE_EDITING=y
CONFIG_FEATURE_EDITING_MAX_LEN=1024
CONFIG_FEATURE_EDITING_VI=y
CONFIG_FEATURE_EDITING_HISTORY=999
CONFIG_FEATURE_EDITING_SAVEHISTORY=y
# CONFIG_FEATURE_EDITING_SAVE_ON_EXIT is not set
CONFIG_FEATURE_REVERSE_SEARCH=y
CONFIG_FEATURE_TAB_COMPLETION=y
# CONFIG_FEATURE_USERNAME_COMPLETION is not set
CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
# CONFIG_FEATURE_EDITING_ASK_TERMINAL is not set
# CONFIG_LOCALE_SUPPORT is not set
# CONFIG_UNICODE_SUPPORT is not set
# CONFIG_UNICODE_USING_LOCALE is not set
# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set
CONFIG_SUBST_WCHAR=0
CONFIG_LAST_SUPPORTED_WCHAR=0
# CONFIG_UNICODE_COMBINING_WCHARS is not set
# CONFIG_UNICODE_WIDE_WCHARS is not set
# CONFIG_UNICODE_BIDI_SUPPORT is not set
# CONFIG_UNICODE_NEUTRAL_TABLE is not set
# CONFIG_UNICODE_PRESERVE_BROKEN is not set
CONFIG_FEATURE_NON_POSIX_CP=y
# CONFIG_FEATURE_VERBOSE_CP_MESSAGE is not set
CONFIG_FEATURE_USE_SENDFILE=y
CONFIG_FEATURE_COPYBUF_KB=4
CONFIG_FEATURE_SKIP_ROOTFS=y
CONFIG_MONOTONIC_SYSCALL=y
CONFIG_IOCTL_HEX2STR_ERROR=y
CONFIG_FEATURE_HWIB=y

#
# Applets
#

#
# Archival Utilities
#
# CONFIG_FEATURE_SEAMLESS_XZ is not set
# CONFIG_FEATURE_SEAMLESS_LZMA is not set
# CONFIG_FEATURE_SEAMLESS_BZ2 is not set
# CONFIG_FEATURE_SEAMLESS_GZ is not set
# CONFIG_FEATURE_SEAMLESS_Z is not set
CONFIG_AR=y
# CONFIG_FEATURE_AR_LONG_FILENAMES is not set
CONFIG_FEATURE_AR_CREATE=y
# CONFIG_UNCOMPRESS is not set
CONFIG_GUNZIP=y
CONFIG_ZCAT=y
CONFIG_FEATURE_GUNZIP_LONG_OPTIONS=y
CONFIG_BUNZIP2=y
CONFIG_BZCAT=y
CONFIG_UNLZMA=y
CONFIG_LZCAT=y
CONFIG_LZMA=y
CONFIG_UNXZ=y
CONFIG_XZCAT=y
CONFIG_XZ=y
# CONFIG_BZIP2 is not set
CONFIG_FEATURE_BZIP2_DECOMPRESS=y
CONFIG_CPIO=y
# CONFIG_FEATURE_CPIO_O is not set
# CONFIG_FEATURE_CPIO_P is not set
# CONFIG_DPKG is not set
# CONFIG_DPKG_DEB is not set
CONFIG_GZIP=y
# CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set
CONFIG_GZIP_FAST=0
# CONFIG_FEATURE_GZIP_LEVELS is not set
CONFIG_FEATURE_GZIP_DECOMPRESS=y
# CONFIG_LZOP is not set
CONFIG_UNLZOP=y
CONFIG_LZOPCAT=y
# CONFIG_LZOP_COMPR_HIGH is not set
# CONFIG_RPM is not set
# CONFIG_RPM2CPIO is not set
CONFIG_TAR=y
CONFIG_FEATURE_TAR_LONG_OPTIONS=y
CONFIG_FEATURE_TAR_CREATE=y
# CONFIG_FEATURE_TAR_AUTODETECT is not set
CONFIG_FEATURE_TAR_FROM=y
# CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set
# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
CONFIG_FEATURE_TAR_TO_COMMAND=y
# CONFIG_FEATURE_TAR_UNAME_GNAME is not set
# CONFIG_FEATURE_TAR_NOPRESERVE_TIME is not set
# CONFIG_FEATURE_TAR_SELINUX is not set
CONFIG_UNZIP=y
CONFIG_FEATURE_UNZIP_CDF=y
CONFIG_FEATURE_UNZIP_BZIP2=y
CONFIG_FEATURE_UNZIP_LZMA=y
CONFIG_FEATURE_UNZIP_XZ=y
# CONFIG_FEATURE_LZMA_FAST is not set

#
# Coreutils
#
CONFIG_BASENAME=y
CONFIG_CAT=y
CONFIG_FEATURE_CATN=y
CONFIG_FEATURE_CATV=y
CONFIG_CHGRP=y
CONFIG_CHMOD=y
CONFIG_CHOWN=y
# CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set
CONFIG_CHROOT=y
CONFIG_CKSUM=y
# CONFIG_COMM is not set
CONFIG_CP=y
# CONFIG_FEATURE_CP_LONG_OPTIONS is not set
CONFIG_CUT=y
CONFIG_DATE=y
CONFIG_FEATURE_DATE_ISOFMT=y
# CONFIG_FEATURE_DATE_NANO is not set
CONFIG_FEATURE_DATE_COMPAT=y
CONFIG_DD=y
CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
CONFIG_FEATURE_DD_IBS_OBS=y
CONFIG_FEATURE_DD_STATUS=y
CONFIG_DF=y
# CONFIG_FEATURE_DF_FANCY is not set
CONFIG_DIRNAME=y
CONFIG_DOS2UNIX=y
CONFIG_UNIX2DOS=y
CONFIG_DU=y
CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
CONFIG_ECHO=y
CONFIG_FEATURE_FANCY_ECHO=y
CONFIG_ENV=y
# CONFIG_EXPAND is not set
# CONFIG_UNEXPAND is not set
CONFIG_EXPR=y
CONFIG_EXPR_MATH_SUPPORT_64=y
CONFIG_FACTOR=y
CONFIG_FALSE=y
CONFIG_FOLD=y
# CONFIG_FSYNC is not set
CONFIG_HEAD=y
CONFIG_FEATURE_FANCY_HEAD=y
CONFIG_HOSTID=y
CONFIG_ID=y
# CONFIG_GROUPS is not set
CONFIG_INSTALL=y
CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
CONFIG_LINK=y
CONFIG_LN=y
CONFIG_LOGNAME=y
CONFIG_LS=y
CONFIG_FEATURE_LS_FILETYPES=y
CONFIG_FEATURE_LS_FOLLOWLINKS=y
CONFIG_FEATURE_LS_RECURSIVE=y
CONFIG_FEATURE_LS_WIDTH=y
CONFIG_FEATURE_LS_SORTFILES=y
CONFIG_FEATURE_LS_TIMESTAMPS=y
CONFIG_FEATURE_LS_USERNAME=y
CONFIG_FEATURE_LS_COLOR=y
CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
CONFIG_MD5SUM=y
CONFIG_SHA1SUM=y
CONFIG_SHA256SUM=y
CONFIG_SHA512SUM=y
CONFIG_SHA3SUM=y

#
# Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum
#
CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
CONFIG_MKDIR=y
CONFIG_MKFIFO=y
CONFIG_MKNOD=y
CONFIG_MKTEMP=y
CONFIG_MV=y
CONFIG_NICE=y
CONFIG_NL=y
CONFIG_NOHUP=y
CONFIG_NPROC=y
CONFIG_OD=y
CONFIG_PASTE=y
CONFIG_PRINTENV=y
CONFIG_PRINTF=y
CONFIG_PWD=y
CONFIG_READLINK=y
CONFIG_FEATURE_READLINK_FOLLOW=y
CONFIG_REALPATH=y
CONFIG_RM=y
CONFIG_RMDIR=y
CONFIG_SEQ=y
CONFIG_SHRED=y
# CONFIG_SHUF is not set
CONFIG_SLEEP=y
CONFIG_FEATURE_FANCY_SLEEP=y
CONFIG_FEATURE_FLOAT_SLEEP=y
CONFIG_SORT=y
CONFIG_FEATURE_SORT_BIG=y
# CONFIG_SPLIT is not set
# CONFIG_FEATURE_SPLIT_FANCY is not set
# CONFIG_STAT is not set
# CONFIG_FEATURE_STAT_FORMAT is not set
# CONFIG_FEATURE_STAT_FILESYSTEM is not set
CONFIG_STTY=y
# CONFIG_SUM is not set
CONFIG_SYNC=y
# CONFIG_FEATURE_SYNC_FANCY is not set
# CONFIG_TAC is not set
CONFIG_TAIL=y
CONFIG_FEATURE_FANCY_TAIL=y
CONFIG_TEE=y
CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
CONFIG_TEST=y
CONFIG_TEST1=y
CONFIG_TEST2=y
CONFIG_FEATURE_TEST_64=y
# CONFIG_TIMEOUT is not set
CONFIG_TOUCH=y
# CONFIG_FEATURE_TOUCH_NODEREF is not set
CONFIG_FEATURE_TOUCH_SUSV3=y
CONFIG_TR=y
CONFIG_FEATURE_TR_CLASSES=y
CONFIG_FEATURE_TR_EQUIV=y
CONFIG_TRUE=y
CONFIG_TRUNCATE=y
CONFIG_TTY=y
CONFIG_UNAME=y
CONFIG_UNAME_OSNAME="GNU/Linux"
CONFIG_BB_ARCH=y
CONFIG_UNIQ=y
CONFIG_UNLINK=y
CONFIG_USLEEP=y
CONFIG_UUDECODE=y
# CONFIG_BASE64 is not set
CONFIG_UUENCODE=y
CONFIG_WC=y
# CONFIG_FEATURE_WC_LARGE is not set
CONFIG_WHOAMI=y
CONFIG_WHO=y
CONFIG_W=y
# CONFIG_USERS is not set
CONFIG_YES=y

#
# Common options
#
CONFIG_FEATURE_VERBOSE=y

#
# Common options for cp and mv
#
CONFIG_FEATURE_PRESERVE_HARDLINKS=y

#
# Common options for df, du, ls
#
CONFIG_FEATURE_HUMAN_READABLE=y

#
# Console Utilities
#
CONFIG_CHVT=y
CONFIG_CLEAR=y
CONFIG_DEALLOCVT=y
CONFIG_DUMPKMAP=y
# CONFIG_FGCONSOLE is not set
# CONFIG_KBD_MODE is not set
CONFIG_LOADFONT=y
# CONFIG_SETFONT is not set
# CONFIG_FEATURE_SETFONT_TEXTUAL_MAP is not set
CONFIG_DEFAULT_SETFONT_DIR=""

#
# Common options for loadfont and setfont
#
CONFIG_FEATURE_LOADFONT_PSF2=y
CONFIG_FEATURE_LOADFONT_RAW=y
CONFIG_LOADKMAP=y
CONFIG_OPENVT=y
CONFIG_RESET=y
CONFIG_RESIZE=y
CONFIG_FEATURE_RESIZE_PRINT=y
CONFIG_SETCONSOLE=y
# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set
CONFIG_SETKEYCODES=y
CONFIG_SETLOGCONS=y
# CONFIG_SHOWKEY is not set

#
# Debian Utilities
#
CONFIG_PIPE_PROGRESS=y
CONFIG_RUN_PARTS=y
CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
CONFIG_START_STOP_DAEMON=y
CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
CONFIG_WHICH=y

#
# klibc-utils
#
# CONFIG_MINIPS is not set
CONFIG_NUKE=y
CONFIG_RESUME=y
CONFIG_RUN_INIT=y

#
# Editors
#
CONFIG_AWK=y
# CONFIG_FEATURE_AWK_LIBM is not set
CONFIG_FEATURE_AWK_GNU_EXTENSIONS=y
CONFIG_CMP=y
CONFIG_DIFF=y
# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
CONFIG_FEATURE_DIFF_DIR=y
# CONFIG_ED is not set
CONFIG_PATCH=y
CONFIG_SED=y
CONFIG_VI=y
CONFIG_FEATURE_VI_MAX_LEN=4096
CONFIG_FEATURE_VI_8BIT=y
CONFIG_FEATURE_VI_COLON=y
CONFIG_FEATURE_VI_YANKMARK=y
CONFIG_FEATURE_VI_SEARCH=y
# CONFIG_FEATURE_VI_REGEX_SEARCH is not set
CONFIG_FEATURE_VI_USE_SIGNALS=y
CONFIG_FEATURE_VI_DOT_CMD=y
CONFIG_FEATURE_VI_READONLY=y
CONFIG_FEATURE_VI_SETOPTS=y
CONFIG_FEATURE_VI_SET=y
CONFIG_FEATURE_VI_WIN_RESIZE=y
CONFIG_FEATURE_VI_ASK_TERMINAL=y
CONFIG_FEATURE_VI_UNDO=y
CONFIG_FEATURE_VI_UNDO_QUEUE=y
CONFIG_FEATURE_VI_UNDO_QUEUE_MAX=256
CONFIG_FEATURE_ALLOW_EXEC=y

#
# Finding Utilities
#
CONFIG_FIND=y
CONFIG_FEATURE_FIND_PRINT0=y
CONFIG_FEATURE_FIND_MTIME=y
CONFIG_FEATURE_FIND_MMIN=y
CONFIG_FEATURE_FIND_PERM=y
CONFIG_FEATURE_FIND_TYPE=y
CONFIG_FEATURE_FIND_XDEV=y
CONFIG_FEATURE_FIND_MAXDEPTH=y
CONFIG_FEATURE_FIND_NEWER=y
# CONFIG_FEATURE_FIND_INUM is not set
CONFIG_FEATURE_FIND_EXEC=y
CONFIG_FEATURE_FIND_EXEC_PLUS=y
CONFIG_FEATURE_FIND_USER=y
CONFIG_FEATURE_FIND_GROUP=y
CONFIG_FEATURE_FIND_NOT=y
CONFIG_FEATURE_FIND_DEPTH=y
CONFIG_FEATURE_FIND_PAREN=y
CONFIG_FEATURE_FIND_SIZE=y
CONFIG_FEATURE_FIND_PRUNE=y
# CONFIG_FEATURE_FIND_DELETE is not set
CONFIG_FEATURE_FIND_PATH=y
CONFIG_FEATURE_FIND_REGEX=y
# CONFIG_FEATURE_FIND_CONTEXT is not set
# CONFIG_FEATURE_FIND_LINKS is not set
CONFIG_GREP=y
CONFIG_EGREP=y
CONFIG_FGREP=y
CONFIG_FEATURE_GREP_CONTEXT=y
CONFIG_XARGS=y
# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
CONFIG_FEATURE_XARGS_SUPPORT_REPL_STR=y
CONFIG_FEATURE_XARGS_SUPPORT_PARALLEL=y
CONFIG_FEATURE_XARGS_SUPPORT_ARGS_FILE=y

#
# Init Utilities
#
# CONFIG_BOOTCHARTD is not set
# CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set
# CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE is not set
CONFIG_HALT=y
CONFIG_POWEROFF=y
CONFIG_REBOOT=y
# CONFIG_FEATURE_CALL_TELINIT is not set
CONFIG_TELINIT_PATH=""
CONFIG_INIT=y
CONFIG_LINUXRC=y
CONFIG_FEATURE_USE_INITTAB=y
CONFIG_FEATURE_KILL_REMOVED=y
CONFIG_FEATURE_KILL_DELAY=0
CONFIG_FEATURE_INIT_SCTTY=y
CONFIG_FEATURE_INIT_SYSLOG=y
CONFIG_FEATURE_INIT_QUIET=y
# CONFIG_FEATURE_INIT_COREDUMPS is not set
CONFIG_INIT_TERMINAL_TYPE="linux"
CONFIG_FEATURE_INIT_MODIFY_CMDLINE=y

#
# Login/Password Management Utilities
#
CONFIG_FEATURE_SHADOWPASSWDS=y
# CONFIG_USE_BB_PWD_GRP is not set
# CONFIG_USE_BB_SHADOW is not set
CONFIG_USE_BB_CRYPT=y
# CONFIG_USE_BB_CRYPT_SHA is not set
CONFIG_ADDGROUP=y
# CONFIG_FEATURE_ADDUSER_TO_GROUP is not set
# CONFIG_ADD_SHELL is not set
# CONFIG_REMOVE_SHELL is not set
CONFIG_ADDUSER=y
# CONFIG_FEATURE_CHECK_NAMES is not set
CONFIG_LAST_ID=60000
CONFIG_FIRST_SYSTEM_ID=100
CONFIG_LAST_SYSTEM_ID=999
# CONFIG_CHPASSWD is not set
CONFIG_FEATURE_DEFAULT_PASSWD_ALGO="md5"
# CONFIG_CRYPTPW is not set
CONFIG_MKPASSWD=y
CONFIG_DELUSER=y
CONFIG_DELGROUP=y
# CONFIG_FEATURE_DEL_USER_FROM_GROUP is not set
CONFIG_GETTY=y
CONFIG_LOGIN=y
# CONFIG_LOGIN_SESSION_AS_CHILD is not set
# CONFIG_LOGIN_SCRIPTS is not set
CONFIG_FEATURE_NOLOGIN=y
CONFIG_FEATURE_SECURETTY=y
CONFIG_PASSWD=y
CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
CONFIG_SU=y
CONFIG_FEATURE_SU_SYSLOG=y
CONFIG_FEATURE_SU_CHECKS_SHELLS=y
# CONFIG_FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY is not set
CONFIG_SULOGIN=y
CONFIG_VLOCK=y

#
# Linux Ext2 FS Progs
#
CONFIG_CHATTR=y
CONFIG_FSCK=y
CONFIG_LSATTR=y
# CONFIG_TUNE2FS is not set

#
# Linux Module Utilities
#
# CONFIG_MODPROBE_SMALL is not set
# CONFIG_DEPMOD is not set
CONFIG_INSMOD=y
CONFIG_LSMOD=y
CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
# CONFIG_MODINFO is not set
CONFIG_MODPROBE=y
# CONFIG_FEATURE_MODPROBE_BLACKLIST is not set
CONFIG_RMMOD=y

#
# Options common to multiple modutils
#
CONFIG_FEATURE_CMDLINE_MODULE_OPTIONS=y
# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
# CONFIG_FEATURE_2_4_MODULES is not set
# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
CONFIG_FEATURE_MODUTILS_ALIAS=y
CONFIG_FEATURE_MODUTILS_SYMBOLS=y
CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"

#
# Linux System Utilities
#
# CONFIG_ACPID is not set
# CONFIG_FEATURE_ACPID_COMPAT is not set
# CONFIG_BLKDISCARD is not set
CONFIG_BLKID=y
# CONFIG_FEATURE_BLKID_TYPE is not set
# CONFIG_BLOCKDEV is not set
# CONFIG_CAL is not set
CONFIG_CHRT=y
CONFIG_DMESG=y
CONFIG_FEATURE_DMESG_PRETTY=y
CONFIG_EJECT=y
# CONFIG_FEATURE_EJECT_SCSI is not set
CONFIG_FALLOCATE=y
# CONFIG_FATATTR is not set
CONFIG_FBSET=y
CONFIG_FEATURE_FBSET_FANCY=y
CONFIG_FEATURE_FBSET_READMODE=y
CONFIG_FDFORMAT=y
CONFIG_FDISK=y
# CONFIG_FDISK_SUPPORT_LARGE_DISKS is not set
CONFIG_FEATURE_FDISK_WRITABLE=y
# CONFIG_FEATURE_AIX_LABEL is not set
# CONFIG_FEATURE_SGI_LABEL is not set
# CONFIG_FEATURE_SUN_LABEL is not set
# CONFIG_FEATURE_OSF_LABEL is not set
CONFIG_FEATURE_GPT_LABEL=y
CONFIG_FEATURE_FDISK_ADVANCED=y
# CONFIG_FINDFS is not set
CONFIG_FLOCK=y
CONFIG_FDFLUSH=y
CONFIG_FREERAMDISK=y
# CONFIG_FSCK_MINIX is not set
CONFIG_FSFREEZE=y
CONFIG_FSTRIM=y
CONFIG_GETOPT=y
CONFIG_FEATURE_GETOPT_LONG=y
CONFIG_HEXDUMP=y
# CONFIG_FEATURE_HEXDUMP_REVERSE is not set
# CONFIG_HD is not set
CONFIG_XXD=y
CONFIG_HWCLOCK=y
CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
# CONFIG_IONICE is not set
CONFIG_IPCRM=y
CONFIG_IPCS=y
CONFIG_LAST=y
# CONFIG_FEATURE_LAST_FANCY is not set
CONFIG_LOSETUP=y
CONFIG_LSPCI=y
CONFIG_LSUSB=y
CONFIG_MDEV=y
CONFIG_FEATURE_MDEV_CONF=y
CONFIG_FEATURE_MDEV_RENAME=y
# CONFIG_FEATURE_MDEV_RENAME_REGEXP is not set
CONFIG_FEATURE_MDEV_EXEC=y
# CONFIG_FEATURE_MDEV_LOAD_FIRMWARE is not set
CONFIG_MESG=y
CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP=y
CONFIG_MKE2FS=y
# CONFIG_MKFS_EXT2 is not set
# CONFIG_MKFS_MINIX is not set
# CONFIG_FEATURE_MINIX2 is not set
# CONFIG_MKFS_REISER is not set
CONFIG_MKDOSFS=y
# CONFIG_MKFS_VFAT is not set
CONFIG_MKSWAP=y
# CONFIG_FEATURE_MKSWAP_UUID is not set
CONFIG_MORE=y
CONFIG_MOUNT=y
# CONFIG_FEATURE_MOUNT_FAKE is not set
# CONFIG_FEATURE_MOUNT_VERBOSE is not set
# CONFIG_FEATURE_MOUNT_HELPERS is not set
# CONFIG_FEATURE_MOUNT_LABEL is not set
# CONFIG_FEATURE_MOUNT_NFS is not set
CONFIG_FEATURE_MOUNT_CIFS=y
CONFIG_FEATURE_MOUNT_FLAGS=y
CONFIG_FEATURE_MOUNT_FSTAB=y
CONFIG_FEATURE_MOUNT_OTHERTAB=y
CONFIG_MOUNTPOINT=y
# CONFIG_NSENTER is not set
CONFIG_PIVOT_ROOT=y
CONFIG_RDATE=y
# CONFIG_RDEV is not set
CONFIG_READPROFILE=y
CONFIG_RENICE=y
# CONFIG_REV is not set
# CONFIG_RTCWAKE is not set
# CONFIG_SCRIPT is not set
# CONFIG_SCRIPTREPLAY is not set
CONFIG_SETARCH=y
CONFIG_LINUX32=y
CONFIG_LINUX64=y
CONFIG_SETPRIV=y
CONFIG_FEATURE_SETPRIV_DUMP=y
CONFIG_FEATURE_SETPRIV_CAPABILITIES=y
CONFIG_FEATURE_SETPRIV_CAPABILITY_NAMES=y
CONFIG_SETSID=y
CONFIG_SWAPON=y
# CONFIG_FEATURE_SWAPON_DISCARD is not set
# CONFIG_FEATURE_SWAPON_PRI is not set
CONFIG_SWAPOFF=y
CONFIG_FEATURE_SWAPONOFF_LABEL=y
CONFIG_SWITCH_ROOT=y
# CONFIG_TASKSET is not set
# CONFIG_FEATURE_TASKSET_FANCY is not set
CONFIG_UEVENT=y
CONFIG_UMOUNT=y
CONFIG_FEATURE_UMOUNT_ALL=y
# CONFIG_UNSHARE is not set
# CONFIG_WALL is not set

#
# Common options for mount/umount
#
CONFIG_FEATURE_MOUNT_LOOP=y
CONFIG_FEATURE_MOUNT_LOOP_CREATE=y
# CONFIG_FEATURE_MTAB_SUPPORT is not set
CONFIG_VOLUMEID=y

#
# Filesystem/Volume identification
#
# CONFIG_FEATURE_VOLUMEID_BCACHE is not set
# CONFIG_FEATURE_VOLUMEID_BTRFS is not set
# CONFIG_FEATURE_VOLUMEID_CRAMFS is not set
CONFIG_FEATURE_VOLUMEID_EXFAT=y
CONFIG_FEATURE_VOLUMEID_EXT=y
CONFIG_FEATURE_VOLUMEID_F2FS=y
CONFIG_FEATURE_VOLUMEID_FAT=y
# CONFIG_FEATURE_VOLUMEID_HFS is not set
# CONFIG_FEATURE_VOLUMEID_ISO9660 is not set
# CONFIG_FEATURE_VOLUMEID_JFS is not set
# CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set
# CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set
# CONFIG_FEATURE_VOLUMEID_LUKS is not set
CONFIG_FEATURE_VOLUMEID_MINIX=y
# CONFIG_FEATURE_VOLUMEID_NILFS is not set
# CONFIG_FEATURE_VOLUMEID_NTFS is not set
# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
# CONFIG_FEATURE_VOLUMEID_REISERFS is not set
# CONFIG_FEATURE_VOLUMEID_ROMFS is not set
# CONFIG_FEATURE_VOLUMEID_SQUASHFS is not set
# CONFIG_FEATURE_VOLUMEID_SYSV is not set
CONFIG_FEATURE_VOLUMEID_UBIFS=y
# CONFIG_FEATURE_VOLUMEID_UDF is not set
# CONFIG_FEATURE_VOLUMEID_XFS is not set

#
# Miscellaneous Utilities
#
# CONFIG_ADJTIMEX is not set
# CONFIG_BBCONFIG is not set
# CONFIG_FEATURE_COMPRESS_BBCONFIG is not set
# CONFIG_BEEP is not set
CONFIG_FEATURE_BEEP_FREQ=0
CONFIG_FEATURE_BEEP_LENGTH_MS=0
# CONFIG_CHAT is not set
# CONFIG_FEATURE_CHAT_NOFAIL is not set
# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
# CONFIG_FEATURE_CHAT_IMPLICIT_CR is not set
# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
# CONFIG_CONSPY is not set
CONFIG_CROND=y
# CONFIG_FEATURE_CROND_D is not set
# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
CONFIG_FEATURE_CROND_SPECIAL_TIMES=y
CONFIG_FEATURE_CROND_DIR="/var/spool/cron"
CONFIG_CRONTAB=y
CONFIG_DC=y
# CONFIG_FEATURE_DC_LIBM is not set
# CONFIG_DEVFSD is not set
# CONFIG_DEVFSD_MODLOAD is not set
# CONFIG_DEVFSD_FG_NP is not set
# CONFIG_DEVFSD_VERBOSE is not set
# CONFIG_FEATURE_DEVFS is not set
CONFIG_DEVMEM=y
# CONFIG_FBSPLASH is not set
# CONFIG_FLASHCP is not set
# CONFIG_FLASH_ERASEALL is not set
# CONFIG_FLASH_LOCK is not set
# CONFIG_FLASH_UNLOCK is not set
CONFIG_HDPARM=y
CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set
CONFIG_HEXEDIT=y
CONFIG_I2CGET=y
CONFIG_I2CSET=y
CONFIG_I2CDUMP=y
CONFIG_I2CDETECT=y
# CONFIG_INOTIFYD is not set
CONFIG_LESS=y
CONFIG_FEATURE_LESS_MAXLINES=9999999
CONFIG_FEATURE_LESS_BRACKETS=y
CONFIG_FEATURE_LESS_FLAGS=y
CONFIG_FEATURE_LESS_TRUNCATE=y
# CONFIG_FEATURE_LESS_MARKS is not set
CONFIG_FEATURE_LESS_REGEXP=y
# CONFIG_FEATURE_LESS_WINCH is not set
# CONFIG_FEATURE_LESS_ASK_TERMINAL is not set
# CONFIG_FEATURE_LESS_DASHCMD is not set
# CONFIG_FEATURE_LESS_LINENUMS is not set
CONFIG_LSSCSI=y
CONFIG_MAKEDEVS=y
# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
CONFIG_FEATURE_MAKEDEVS_TABLE=y
# CONFIG_MAN is not set
CONFIG_MICROCOM=y
CONFIG_MT=y
# CONFIG_NANDWRITE is not set
# CONFIG_NANDDUMP is not set
CONFIG_PARTPROBE=y
# CONFIG_RAIDAUTORUN is not set
# CONFIG_READAHEAD is not set
# CONFIG_RFKILL is not set
CONFIG_RUNLEVEL=y
# CONFIG_RX is not set
CONFIG_SETFATTR=y
CONFIG_SETSERIAL=y
CONFIG_STRINGS=y
CONFIG_TIME=y
# CONFIG_TTYSIZE is not set
CONFIG_UBIRENAME=y
# CONFIG_UBIATTACH is not set
# CONFIG_UBIDETACH is not set
# CONFIG_UBIMKVOL is not set
# CONFIG_UBIRMVOL is not set
# CONFIG_UBIRSVOL is not set
# CONFIG_UBIUPDATEVOL is not set
# CONFIG_VOLNAME is not set
CONFIG_WATCHDOG=y

#
# Networking Utilities
#
CONFIG_FEATURE_IPV6=y
# CONFIG_FEATURE_UNIX_LOCAL is not set
CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
CONFIG_ARP=y
CONFIG_ARPING=y
# CONFIG_BRCTL is not set
# CONFIG_FEATURE_BRCTL_FANCY is not set
# CONFIG_FEATURE_BRCTL_SHOW is not set
CONFIG_DNSD=y
CONFIG_ETHER_WAKE=y
# CONFIG_FTPD is not set
# CONFIG_FEATURE_FTPD_WRITE is not set
# CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST is not set
# CONFIG_FEATURE_FTPD_AUTHENTICATION is not set
# CONFIG_FTPGET is not set
# CONFIG_FTPPUT is not set
# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
CONFIG_HOSTNAME=y
CONFIG_DNSDOMAINNAME=y
# CONFIG_HTTPD is not set
# CONFIG_FEATURE_HTTPD_RANGES is not set
# CONFIG_FEATURE_HTTPD_SETUID is not set
# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
# CONFIG_FEATURE_HTTPD_CGI is not set
# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
# CONFIG_FEATURE_HTTPD_PROXY is not set
# CONFIG_FEATURE_HTTPD_GZIP is not set
CONFIG_IFCONFIG=y
CONFIG_FEATURE_IFCONFIG_STATUS=y
CONFIG_FEATURE_IFCONFIG_SLIP=y
CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
CONFIG_FEATURE_IFCONFIG_HW=y
# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
# CONFIG_IFENSLAVE is not set
# CONFIG_IFPLUGD is not set
CONFIG_IFUP=y
CONFIG_IFDOWN=y
CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
CONFIG_FEATURE_IFUPDOWN_IP=y
CONFIG_FEATURE_IFUPDOWN_IPV4=y
CONFIG_FEATURE_IFUPDOWN_IPV6=y
CONFIG_FEATURE_IFUPDOWN_MAPPING=y
# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set
CONFIG_INETD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
# CONFIG_FEATURE_INETD_RPC is not set
CONFIG_IP=y
CONFIG_IPADDR=y
CONFIG_IPLINK=y
CONFIG_IPROUTE=y
CONFIG_IPTUNNEL=y
CONFIG_IPRULE=y
CONFIG_IPNEIGH=y
CONFIG_FEATURE_IP_ADDRESS=y
CONFIG_FEATURE_IP_LINK=y
CONFIG_FEATURE_IP_ROUTE=y
CONFIG_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
CONFIG_FEATURE_IP_TUNNEL=y
CONFIG_FEATURE_IP_RULE=y
CONFIG_FEATURE_IP_NEIGH=y
# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
# CONFIG_IPCALC is not set
# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
# CONFIG_FEATURE_IPCALC_FANCY is not set
# CONFIG_FAKEIDENTD is not set
CONFIG_NAMEIF=y
# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
# CONFIG_NBDCLIENT is not set
# CONFIG_NC is not set
# CONFIG_NETCAT is not set
# CONFIG_NC_SERVER is not set
# CONFIG_NC_EXTRA is not set
# CONFIG_NC_110_COMPAT is not set
CONFIG_NETSTAT=y
# CONFIG_FEATURE_NETSTAT_WIDE is not set
# CONFIG_FEATURE_NETSTAT_PRG is not set
CONFIG_NSLOOKUP=y
# CONFIG_NTPD is not set
# CONFIG_FEATURE_NTPD_SERVER is not set
# CONFIG_FEATURE_NTPD_CONF is not set
CONFIG_PING=y
# CONFIG_PING6 is not set
CONFIG_FEATURE_FANCY_PING=y
# CONFIG_PSCAN is not set
CONFIG_ROUTE=y
# CONFIG_SLATTACH is not set
# CONFIG_SSL_CLIENT is not set
# CONFIG_TCPSVD is not set
# CONFIG_UDPSVD is not set
CONFIG_TELNET=y
CONFIG_FEATURE_TELNET_TTYPE=y
CONFIG_FEATURE_TELNET_AUTOLOGIN=y
CONFIG_FEATURE_TELNET_WIDTH=y
# CONFIG_TELNETD is not set
# CONFIG_FEATURE_TELNETD_STANDALONE is not set
# CONFIG_FEATURE_TELNETD_INETD_WAIT is not set
CONFIG_TFTP=y
# CONFIG_FEATURE_TFTP_PROGRESS_BAR is not set
# CONFIG_TFTPD is not set

#
# Common options for tftp/tftpd
#
CONFIG_FEATURE_TFTP_GET=y
CONFIG_FEATURE_TFTP_PUT=y
CONFIG_FEATURE_TFTP_BLOCKSIZE=y
# CONFIG_TFTP_DEBUG is not set
# CONFIG_TLS is not set
CONFIG_TRACEROUTE=y
# CONFIG_TRACEROUTE6 is not set
# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
# CONFIG_TUNCTL is not set
# CONFIG_FEATURE_TUNCTL_UG is not set
CONFIG_VCONFIG=y
CONFIG_WGET=y
CONFIG_FEATURE_WGET_LONG_OPTIONS=y
CONFIG_FEATURE_WGET_STATUSBAR=y
CONFIG_FEATURE_WGET_AUTHENTICATION=y
CONFIG_FEATURE_WGET_TIMEOUT=y
# CONFIG_FEATURE_WGET_HTTPS is not set
# CONFIG_FEATURE_WGET_OPENSSL is not set
# CONFIG_WHOIS is not set
# CONFIG_ZCIP is not set
# CONFIG_UDHCPD is not set
# CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC is not set
# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
CONFIG_DHCPD_LEASES_FILE=""
# CONFIG_DUMPLEASES is not set
# CONFIG_DHCPRELAY is not set
CONFIG_UDHCPC=y
CONFIG_FEATURE_UDHCPC_ARPING=y
CONFIG_FEATURE_UDHCPC_SANITIZEOPT=y
CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
# CONFIG_UDHCPC6 is not set
# CONFIG_FEATURE_UDHCPC6_RFC3646 is not set
# CONFIG_FEATURE_UDHCPC6_RFC4704 is not set
# CONFIG_FEATURE_UDHCPC6_RFC4833 is not set

#
# Common options for DHCP applets
#
# CONFIG_FEATURE_UDHCP_PORT is not set
CONFIG_UDHCP_DEBUG=0
CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
# CONFIG_FEATURE_UDHCP_RFC3397 is not set
CONFIG_FEATURE_UDHCP_8021Q=y
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n"

#
# Print Utilities
#
# CONFIG_LPD is not set
# CONFIG_LPR is not set
# CONFIG_LPQ is not set

#
# Mail Utilities
#
# CONFIG_MAKEMIME is not set
# CONFIG_POPMAILDIR is not set
# CONFIG_FEATURE_POPMAILDIR_DELIVERY is not set
# CONFIG_REFORMIME is not set
# CONFIG_FEATURE_REFORMIME_COMPAT is not set
# CONFIG_SENDMAIL is not set
CONFIG_FEATURE_MIME_CHARSET=""

#
# Process Utilities
#
CONFIG_FREE=y
CONFIG_FUSER=y
# CONFIG_IOSTAT is not set
CONFIG_KILL=y
CONFIG_KILLALL=y
CONFIG_KILLALL5=y
CONFIG_LSOF=y
# CONFIG_MPSTAT is not set
# CONFIG_NMETER is not set
# CONFIG_PGREP is not set
# CONFIG_PKILL is not set
CONFIG_PIDOF=y
CONFIG_FEATURE_PIDOF_SINGLE=y
CONFIG_FEATURE_PIDOF_OMIT=y
# CONFIG_PMAP is not set
# CONFIG_POWERTOP is not set
# CONFIG_FEATURE_POWERTOP_INTERACTIVE is not set
CONFIG_PS=y
# CONFIG_FEATURE_PS_WIDE is not set
# CONFIG_FEATURE_PS_LONG is not set
# CONFIG_FEATURE_PS_TIME is not set
# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
# CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set
# CONFIG_PSTREE is not set
# CONFIG_PWDX is not set
# CONFIG_SMEMCAP is not set
CONFIG_BB_SYSCTL=y
CONFIG_TOP=y
CONFIG_FEATURE_TOP_INTERACTIVE=y
CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
# CONFIG_FEATURE_TOP_SMP_CPU is not set
# CONFIG_FEATURE_TOP_DECIMALS is not set
# CONFIG_FEATURE_TOP_SMP_PROCESS is not set
# CONFIG_FEATURE_TOPMEM is not set
CONFIG_UPTIME=y
# CONFIG_FEATURE_UPTIME_UTMP_SUPPORT is not set
CONFIG_WATCH=y
# CONFIG_FEATURE_SHOW_THREADS is not set

#
# Runit Utilities
#
# CONFIG_CHPST is not set
# CONFIG_SETUIDGID is not set
# CONFIG_ENVUIDGID is not set
# CONFIG_ENVDIR is not set
# CONFIG_SOFTLIMIT is not set
# CONFIG_RUNSV is not set
# CONFIG_RUNSVDIR is not set
# CONFIG_FEATURE_RUNSVDIR_LOG is not set
# CONFIG_SV is not set
CONFIG_SV_DEFAULT_SERVICE_DIR=""
CONFIG_SVC=y
# CONFIG_SVLOGD is not set
# CONFIG_CHCON is not set
# CONFIG_GETENFORCE is not set
# CONFIG_GETSEBOOL is not set
# CONFIG_LOAD_POLICY is not set
# CONFIG_MATCHPATHCON is not set
# CONFIG_RUNCON is not set
# CONFIG_SELINUXENABLED is not set
# CONFIG_SESTATUS is not set
# CONFIG_SETENFORCE is not set
# CONFIG_SETFILES is not set
# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
# CONFIG_RESTORECON is not set
# CONFIG_SETSEBOOL is not set

#
# Shells
#
CONFIG_SH_IS_ASH=y
# CONFIG_SH_IS_HUSH is not set
# CONFIG_SH_IS_NONE is not set
# CONFIG_BASH_IS_ASH is not set
# CONFIG_BASH_IS_HUSH is not set
CONFIG_BASH_IS_NONE=y
CONFIG_ASH=y
CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
CONFIG_ASH_INTERNAL_GLOB=y
CONFIG_ASH_BASH_COMPAT=y
CONFIG_ASH_JOB_CONTROL=y
CONFIG_ASH_ALIAS=y
CONFIG_ASH_RANDOM_SUPPORT=y
CONFIG_ASH_EXPAND_PRMT=y
CONFIG_ASH_IDLE_TIMEOUT=y
# CONFIG_ASH_MAIL is not set
CONFIG_ASH_ECHO=y
CONFIG_ASH_PRINTF=y
CONFIG_ASH_TEST=y
CONFIG_ASH_HELP=y
CONFIG_ASH_GETOPTS=y
CONFIG_ASH_CMDCMD=y
# CONFIG_CTTYHACK is not set
# CONFIG_HUSH is not set
# CONFIG_HUSH_BASH_COMPAT is not set
# CONFIG_HUSH_BRACE_EXPANSION is not set
# CONFIG_HUSH_INTERACTIVE is not set
# CONFIG_HUSH_SAVEHISTORY is not set
# CONFIG_HUSH_JOB is not set
# CONFIG_HUSH_TICK is not set
# CONFIG_HUSH_IF is not set
# CONFIG_HUSH_LOOPS is not set
# CONFIG_HUSH_CASE is not set
# CONFIG_HUSH_FUNCTIONS is not set
# CONFIG_HUSH_LOCAL is not set
# CONFIG_HUSH_RANDOM_SUPPORT is not set
# CONFIG_HUSH_MODE_X is not set
# CONFIG_HUSH_ECHO is not set
# CONFIG_HUSH_PRINTF is not set
# CONFIG_HUSH_TEST is not set
# CONFIG_HUSH_HELP is not set
# CONFIG_HUSH_EXPORT is not set
# CONFIG_HUSH_EXPORT_N is not set
# CONFIG_HUSH_READONLY is not set
# CONFIG_HUSH_KILL is not set
# CONFIG_HUSH_WAIT is not set
# CONFIG_HUSH_TRAP is not set
# CONFIG_HUSH_TYPE is not set
# CONFIG_HUSH_TIMES is not set
# CONFIG_HUSH_READ is not set
# CONFIG_HUSH_SET is not set
# CONFIG_HUSH_UNSET is not set
# CONFIG_HUSH_ULIMIT is not set
# CONFIG_HUSH_UMASK is not set
# CONFIG_HUSH_GETOPTS is not set
# CONFIG_HUSH_MEMLEAK is not set

#
# Options common to all shells
#
CONFIG_FEATURE_SH_MATH=y
CONFIG_FEATURE_SH_MATH_64=y
CONFIG_FEATURE_SH_EXTRA_QUIET=y
# CONFIG_FEATURE_SH_STANDALONE is not set
# CONFIG_FEATURE_SH_NOFORK is not set
CONFIG_FEATURE_SH_READ_FRAC=y
# CONFIG_FEATURE_SH_HISTFILESIZE is not set

#
# System Logging Utilities
#
CONFIG_KLOGD=y
CONFIG_FEATURE_KLOGD_KLOGCTL=y
CONFIG_LOGGER=y
# CONFIG_LOGREAD is not set
# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
CONFIG_SYSLOGD=y
CONFIG_FEATURE_ROTATE_LOGFILE=y
CONFIG_FEATURE_REMOTE_LOG=y
# CONFIG_FEATURE_SYSLOGD_DUP is not set
# CONFIG_FEATURE_SYSLOGD_CFG is not set
CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256
# CONFIG_FEATURE_IPC_SYSLOG is not set
CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=0
# CONFIG_FEATURE_KMSG_SYSLOG is not set

le script dhcp :

#!/bin/sh

# udhcpc script edited by Tim Riker <Tim@Rikers.org>

[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1

RESOLV_CONF="/etc/resolv.conf"
[ -e $RESOLV_CONF ] || touch $RESOLV_CONF
[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
[ -n "$subnet" ] && NETMASK="netmask $subnet"

case "$1" in
       deconfig)
               /sbin/ifconfig $interface up
               /sbin/ifconfig $interface 0.0.0.0

               # drop info from this interface
               # resolv.conf may be a symlink to /tmp/, so take care
               TMPFILE=$(mktemp)
               grep -vE "# $interface\$" $RESOLV_CONF > $TMPFILE
               cat $TMPFILE > $RESOLV_CONF
               rm -f $TMPFILE

               if [ -x /usr/sbin/avahi-autoipd ]; then
                       /usr/sbin/avahi-autoipd -k $interface
               fi
               ;;

       leasefail|nak)
               if [ -x /usr/sbin/avahi-autoipd ]; then
                       /usr/sbin/avahi-autoipd -wD $interface --no-chroot
               fi
               ;;

       renew|bound)
               if [ -x /usr/sbin/avahi-autoipd ]; then
                       /usr/sbin/avahi-autoipd -k $interface
               fi
               /sbin/ifconfig $interface $ip $BROADCAST $NETMASK

               if [ -n "$router" ] ; then
                       echo "deleting routers"
                       while route del default gw 0.0.0.0 dev $interface 2> /dev/null; do
                               :
                       done

                       for i in $router ; do
                               route add default gw $i dev $interface
                       done
               fi

               # drop info from this interface
               # resolv.conf may be a symlink to /tmp/, so take care
               TMPFILE=$(mktemp)
               grep -vE "# $interface\$" $RESOLV_CONF > $TMPFILE
               cat $TMPFILE > $RESOLV_CONF
               rm -f $TMPFILE

               # prefer rfc3359 domain search list (option 119) if available
               if [ -n "$search" ]; then
                       search_list=$search
               elif [ -n "$domain" ]; then
                       search_list=$domain
               fi

               [ -n "$search_list" ] &&
                       echo "search $search_list # $interface" >> $RESOLV_CONF

               for i in $dns ; do
                       echo adding dns $i
                       echo "nameserver $i # $interface" >> $RESOLV_CONF
               done
               ;;
esac

HOOK_DIR="$0.d"
for hook in "${HOOK_DIR}/"*; do
   [ -f "${hook}" -a -x "${hook}" ] || continue
   "${hook}" "${@}"
done

exit 0

Le résultat est celui de la caoomande ifconfig, le résutat de ip -a est le suivant :

BusyBox v1.29.3 (2019-05-07 11:37:40 CEST) multi-call binary.

Usage: ip [OPTIONS] address|route|link|tunnel|neigh|rule [COMMAND]

OPTIONS := -f[amily] inet|inet6|link | -o[neline]
COMMAND :=
ip addr add|del IFADDR dev IFACE | show|flush [dev IFACE] [to PREFIX]
ip route list|flush|add|del|change|append|replace|test ROUTE
ip link set IFACE [up|down] [arp on|off] [multicast on|off]
       [promisc on|off] [mtu NUM] [name NAME] [qlen NUM] [address MAC]
       [master IFACE | nomaster]
ip tunnel add|change|del|show [NAME]
       [mode ipip|gre|sit]
       [remote ADDR] [local ADDR] [ttl TTL]
ip neigh show|flush [to PREFIX] [dev DEV] [nud STATE]
ip rule [list] | add|del SELECTOR ACTION

09/05/19 à 11h54

+0 -0

ache, jeudi 09 mai 2019 à 12h08
Modifié

Certes, mais comme beaucoup, je n’utilise pas buildroot tous les jours. On utilise généralement raspbian, Arch ARM ou autre. La Raspberry pouvant se permettre d’avoir un système entier puisqu’elle a peu plus de puissance que d’autres cartes.

C’est un serveur DHCP autre (mais fonctionnel).

ox223252

Très intéressant ! Ça veut dire que tu peux vérifier du coté du serveur DHCP s’il reçoit une requête DHCP donc ? Par exemple avec un tcpdump ? On peut avoir plus d’information sur ce serveur DHCP ? Je ne doute pas qu’il soit fonctionnel. Mais puisqu’il l’est il doit pouvoir nous dire s’il reçoit bien les requêtes qu’il devrait.

le fichier busybox.config : le script dhcp :

Je vais partir du principe que si tu les avait éditer, tu nous l’aurais dis. Donc ce sont les même que sur le serveur git donc, que j’ai déjà lu.

Le résultat est celui de la caoomande ifconfig, le résutat de ip -a est le suivant :

BusyBox v1.29.3 (2019-05-07 11:37:40 CEST) multi-call binary.

Usage: ip [OPTIONS] address|route|link|tunnel|neigh|rule [COMMAND]

OPTIONS := -f[amily] inet|inet6|link | -o[neline]
COMMAND :=
ip addr add|del IFADDR dev IFACE | show|flush [dev IFACE] [to PREFIX]
ip route list|flush|add|del|change|append|replace|test ROUTE
ip link set IFACE [up|down] [arp on|off] [multicast on|off]
       [promisc on|off] [mtu NUM] [name NAME] [qlen NUM] [address MAC]
       [master IFACE | nomaster]
ip tunnel add|change|del|show [NAME]
       [mode ipip|gre|sit]
       [remote ADDR] [local ADDR] [ttl TTL]
ip neigh show|flush [to PREFIX] [dev DEV] [nud STATE]
ip rule [list] | add|del SELECTOR ACTION

Merci. Et pour la commande ip a ? Sans le '-' ? Ici le résultat est simplement comment utiliser la commande ip car rajouter le '-' crée un problème d’utilisation. ip a étant un raccourcis pour ip address. Afin de vérifier en premier lieu l’état du lien. On préfère désormais utiliser la commande ip plutôt que les anciennes commandes comme ifconfig.

09/05/19 à 12h08
Modifié

ache.one 🦹 👾 🦊

+0 -0

ox223252, jeudi 09 mai 2019 à 15h42
Modifié

On utilise généralement raspbian, Arch ARM ou autre. La Raspberry pouvant se permettre d’avoir un système entier puisqu’elle a peu plus de puissance que d’autres cartes.

[ache]

En fait l’idée c’est de comprendre buildroot, donc je suis des tutos (ou docs tel que bootlin), et je fais des tests, sinon effectivement raspbian ça fait bien souvent le taf .

Je ne peut avoir plus d’information sur ce serveur DHCP ? Je ne doute pas qu’il soit fonctionnel. Mais puisqu’il l’est il doit pouvoir nous dire s’il reçoit bien les requêtes qu’il devrait. Soruce:[ache]

Je ne peux pas vérifier pour le DHCP, je n’ai pas la main dessus, et l’admin sys est en vacance. par contre tcpdump ça je peux :

sudo tcpdump -i enp0s25 port 67 or port 68 -e -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on enp0s25, link-type EN10MB (Ethernet), capture size 262144 bytes
13:59:25.541559 b8:27:eb:3a:75:c2 > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 342: 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from b8:27:eb:3a:75:c2, length 300
13:59:25.541882 00:15:5d:41:1f:27 > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 354: 10.54.65.33.67 > 255.255.255.255.68: BOOTP/DHCP, Reply, length 312
13:59:25.661535 b8:27:eb:3a:75:c2 > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 345: 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from b8:27:eb:3a:75:c2, length 303
13:59:25.661908 00:15:5d:41:1f:27 > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 354: 10.54.65.33.67 > 255.255.255.255.68: BOOTP/DHCP, Reply, length 312

Effectivement quand j’ai une IP, je vois bien passer la trame DHCP, mais lors de certain reboot, je n’ai pas de requête DHCP (il semble donc logique que je n’ai pas de réponse et donc d’IP). Ça résous pas le problème, mais au moins ça semble bien venir du raspberry pi.

Merci. Et pour la commande ip a ? Sans le '-' ?

[ache]

Ok je devais pas avoir les yeux en face des trous

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
      valid_lft forever preferred_lft forever
   inet6 ::1/128 scope host
      valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether b8:27:eb:3a:75:c2 brd ff:ff:ff:ff:ff:ff
   inet6 fe80::ba27:ebff:fe3a:75c2/64 scope link
      valid_lft forever preferred_lft forever

09/05/19 à 15h42
Modifié

+0 -0

Connectez-vous pour pouvoir poster un message.
Connexion

Pas encore membre ?

Créez un compte en une minute pour profiter pleinement de toutes les fonctionnalités de Zeste de Savoir. Ici, tout est gratuit et sans publicité.
Créer un compte