Bonjour à tous!
J’ai récemment ajouté de la ram au pc de travail de mon frère passant de 4Go à 16. (on s’est dit que comme ça il aurait le temps de voir venir.). C’est de la ram DDR4.
On s’est aperçu que seul le channel A semble être détecté, et que le B ne reconnais que 64MB de ram, malgré le fait qu’il semble être affiché 32Go pour le maximum.
Voici ce que me donne dmicode -t memory
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
Handle 0x0028, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x002A, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: SODIMM
Set: None
Locator: DIMM 0
Bank Locator: CHANNEL A
Type: DDR4
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 2400 MT/s
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: A1_AssetTagNum0
Part Number: CMSX16GX4M2A2400C16
Rank: 1
Configured Memory Speed: 1866 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Handle 0x002B, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: <OUT OF SPEC>
Set: None
Locator: <BAD INDEX>
Bank Locator: <BAD INDEX>
Type: <OUT OF SPEC>
Type Detail: None
Speed: Unknown
Manufacturer: <BAD INDEX>
Serial Number: <BAD INDEX>
Asset Tag: <BAD INDEX>
Part Number: <BAD INDEX>
Rank: Unknown
Configured Memory Speed: Unknown
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x002C, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 8 bits
Data Width: 8 bits
Size: 64 MB
Form Factor: Unknown
Set: None
Locator: DIMM 0
Bank Locator: CHANNEL B
Type: DDR4
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 2400 MT/s
Manufacturer: <BAD INDEX>
Serial Number: 00000000
Asset Tag: <BAD INDEX>
Part Number: <BAD INDEX>
Rank: 1
Configured Memory Speed: 1866 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Handle 0x002D, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: <OUT OF SPEC>
Set: None
Locator: <BAD INDEX>
Bank Locator: <BAD INDEX>
Type: <OUT OF SPEC>
Type Detail: None
Speed: Unknown
Manufacturer: <BAD INDEX>
Serial Number: <BAD INDEX>
Asset Tag: <BAD INDEX>
Part Number: <BAD INDEX>
Rank: Unknown
Configured Memory Speed: Unknown
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
et memconf (utilisé parceque je n’était pas sûr de comprendre le fait qu’il y aie 4 entrées):
memconf: V3.15 16-Jul-2019 http://sourceforge.net/projects/memconf/
hostname: ubuntu
ASUSTeK COMPUTER INC. VivoBook_ASUSLaptop X510QA_X510QA (AMD A12-9720P RADEON R7, 12 COMPUTE CORES 4C+8G, AuthenticAMD AMD A12-9720P RADEON R7, 12 COMPUTE CORES 4C+8G 2700MHz)
Memory Error Correction: None
Maximum Memory: 32768MB (32GB)
DIMM 0 CHANNEL A: 8192MB 2400 MT/s Synchronous Unbuffered (Unregistered) DDR4 SODIMM, Corsair CMSX16GX4M2A2400C16
DIMM 0 CHANNEL B: 64MB 2400 MT/s Synchronous Unbuffered (Unregistered) DDR4, <BAD INDEX> <BAD INDEX>
empty memory sockets: <BAD INDEX> CHANNEL A, <BAD INDEX> CHANNEL B
total memory = 8256MB (8.0625GB)
Ce que je ne comprends pas, ce le fait qu’il semble être considéré qu’il y a 3 sockets mémoire (alors que sur la carte, il y en a bien que 2). Et le fait que seul 64MB du second slot soit reconnu (et ça concerne toujours ce slot, même si j’échange les barrettes).
Est-ce un problème de ce solt? Y a-t-il des solutions pour diagnostiquer mieux ce soucis?
Merci de vos réponses!