Problème de partage de connexion

Le problème exposé dans ce sujet a été résolu.

Bonjour,

Actuellement, j’utilise Internet via le partage de connexion de mon téléphone. Le hic, c’est que, bien que fonctionnant jusqu’à là, ça arrêté de fonctionner depuis hier. Quand j’essaye d’activer le partage de connexion sur mon téléphone (via USB, mais le problème est le même en wifi) :

connexion
connexion

Quand je reboot, j’ai pas ce problème, mais viendrait de l’ordinateur, qui chercherait la connexion (une roue tourne), et ne trouve rien.

Si vous avez une idée de résolution du problème…

Je suis sous MIUI 9.5 pour le téléphone (une version modifiée d’android) et la version 18.3 de Linux Mint pour l’ordinateur.

+0 -0

Hummm, si tu es sous Linux, le résultat de dmesg (après avoir branché le téléphone en partage de connection USB) pourrait nous aider.

Aussi, est-ce qu’une interface est ajoutée après avoir branché et activer le partage de connection en USB depuis le téléphone ?

+0 -0

Mon résultat :

[    0.000000] Linux version 4.15.0-34-generic (buildd@lgw01-amd64-037) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #37~16.04.1-Ubuntu SMP Tue Aug 28 10:44:06 UTC 2018 (Ubuntu 4.15.0-34.37~16.04.1-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-34-generic root=UUID=cd220c7e-f6dd-4e2a-bce8-d7653c257d9d ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9ae1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9ae2000-0x00000000d9df4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d9df5000-0x00000000d9e7efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9e7f000-0x00000000d9f19fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d9f1a000-0x00000000da507fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da508000-0x00000000da508fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da509000-0x00000000da54bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da54c000-0x00000000dac41fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dac42000-0x00000000daff2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daff3000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Notebook                        W310CZ/CZ-T      /W310CZ          , BIOS 4.6.5 12/24/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   5 base 11F800000 mask FFF800000 uncachable
[    0.000000]   6 base 11F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 4014M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 128M    num_reg: 8      lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd780-0x000fd78f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0x1113f000, 0x1113ffff] PGTABLE
[    0.000000] BRK [0x11140000, 0x11140fff] PGTABLE
[    0.000000] BRK [0x11141000, 0x11141fff] PGTABLE
[    0.000000] BRK [0x11142000, 0x11142fff] PGTABLE
[    0.000000] BRK [0x11143000, 0x11143fff] PGTABLE
[    0.000000] BRK [0x11144000, 0x11144fff] PGTABLE
[    0.000000] BRK [0x11145000, 0x11145fff] PGTABLE
[    0.000000] BRK [0x11146000, 0x11146fff] PGTABLE
[    0.000000] BRK [0x11147000, 0x11147fff] PGTABLE
[    0.000000] BRK [0x11148000, 0x11148fff] PGTABLE
[    0.000000] BRK [0x11149000, 0x11149fff] PGTABLE
[    0.000000] BRK [0x1114a000, 0x1114afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x315fc000-0x34af5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 Intel )
[    0.000000] ACPI: XSDT 0x00000000D9F0A078 00006C (v01 Intel  CHIEF    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D9F13F30 00010C (v05 Intel  CHIEF    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D9F0A178 009DB7 (v02 Intel  CHIEF    00000023 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000D9F18080 000040
[    0.000000] ACPI: APIC 0x00000000D9F14040 000062 (v03 Intel  CHIEF    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000D9F140A8 000044 (v01 Intel  CHIEF    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000D9F140F0 00003C (v01 Intel  CHIEF    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000D9F14130 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 0x00000000D9F150C8 000038 (v01 Intel  CHIEF    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D9F15100 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D9F15418 000860 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D9F15C78 000B22 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11f5d2000-0x11f5fcfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000d9ae1fff]
[    0.000000]   node   0: [mem 0x00000000d9df5000-0x00000000d9e7efff]
[    0.000000]   node   0: [mem 0x00000000da508000-0x00000000da508fff]
[    0.000000]   node   0: [mem 0x00000000da54c000-0x00000000dac41fff]
[    0.000000]   node   0: [mem 0x00000000daff3000-0x00000000daffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[    0.000000] On node 0 totalpages: 1021451
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13890 pages used for memmap
[    0.000000]   DMA32 zone: 888943 pages, LIFO batch:31
[    0.000000]   Normal zone: 2008 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9ae2000-0xd9df4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9e7f000-0xd9f19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9f1a000-0xda507fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda509000-0xda54bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdac42000-0xdaff2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u1048576
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1005468
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-34-generic root=UUID=cd220c7e-f6dd-4e2a-bce8-d7653c257d9d ro quiet splash vt.handoff=7
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3871424K/4085804K available (12300K kernel code, 2470K rwdata, 4256K rodata, 2408K init, 2416K bss, 214380K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39153 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 1795.719 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.43 BogoMIPS (lpj=7182876)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024000] mce: CPU supports 7 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Speculative Store Bypass: Vulnerable
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.028079] TSC deadline timer enabled
[    0.028083] smpboot: CPU0: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.028167] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.028196] ... version:                3
[    0.028196] ... bit width:              48
[    0.028197] ... generic registers:      8
[    0.028198] ... value mask:             0000ffffffffffff
[    0.028199] ... max period:             00007fffffffffff
[    0.028200] ... fixed-purpose events:   3
[    0.028200] ... event mask:             00000007000000ff
[    0.028245] Hierarchical SRCU implementation.
[    0.029298] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.029316] smp: Bringing up secondary CPUs ...
[    0.029419] x86: Booting SMP configuration:
[    0.029420] .... node  #0, CPUs:      #1
[    0.031731] smp: Brought up 1 node, 2 CPUs
[    0.031731] smpboot: Max logical packages: 1
[    0.031731] smpboot: Total of 2 processors activated (7182.87 BogoMIPS)
[    0.032187] devtmpfs: initialized
[    0.032187] x86/mm: Memory block size: 128MB
[    0.032561] evm: security.selinux
[    0.032562] evm: security.SMACK64
[    0.032563] evm: security.SMACK64EXEC
[    0.032564] evm: security.SMACK64TRANSMUTE
[    0.032564] evm: security.SMACK64MMAP
[    0.032565] evm: security.apparmor
[    0.032566] evm: security.ima
[    0.032566] evm: security.capability
[    0.032606] PM: Registering ACPI NVS region [mem 0xd9e7f000-0xd9f19fff] (634880 bytes)
[    0.032606] PM: Registering ACPI NVS region [mem 0xda509000-0xda54bfff] (274432 bytes)
[    0.032606] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.032606] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.032606] pinctrl core: initialized pinctrl subsystem
[    0.032606] RTC time: 10:46:58, date: 09/18/18
[    0.032606] NET: Registered protocol family 16
[    0.032606] audit: initializing netlink subsys (disabled)
[    0.032606] audit: type=2000 audit(1537267618.032:1): state=initialized audit_enabled=0 res=1
[    0.032606] cpuidle: using governor ladder
[    0.032606] cpuidle: using governor menu
[    0.032606] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.032606] ACPI: bus type PCI registered
[    0.032606] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.032606] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.032606] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.032606] PCI: Using configuration type 1 for base access
[    0.032606] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.032753] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.032753] ACPI: Added _OSI(Module Device)
[    0.032753] ACPI: Added _OSI(Processor Device)
[    0.032753] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.032753] ACPI: Added _OSI(Processor Aggregator Device)
[    0.032753] ACPI: Added _OSI(Linux-Dell-Video)
[    0.032753] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.032753] ACPI: Executed 1 blocks of module-level executable AML code
[    0.042915] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.043863] ACPI: Dynamic OEM Table Load:
[    0.043872] ACPI: SSDT 0xFFFF917959CCF000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.044609] ACPI: Dynamic OEM Table Load:
[    0.044615] ACPI: SSDT 0xFFFF917959D4E400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.045132] ACPI: Dynamic OEM Table Load:
[    0.045137] ACPI: SSDT 0xFFFF917959DCC400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.045846] ACPI: EC: EC started
[    0.045847] ACPI: EC: interrupt blocked
[    0.260121] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.260124] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.260126] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.260127] ACPI: Interpreter enabled
[    0.260159] ACPI: (supports S0 S3 S4 S5)
[    0.260161] ACPI: Using IOAPIC for interrupt routing
[    0.260206] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.260584] ACPI: Enabled 16 GPEs in block 00 to 3F
[    0.272894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.272902] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.273456] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.273826] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.273827] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.274716] PCI host bridge to bus 0000:00
[    0.274719] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.274722] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.274724] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.274725] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.274727] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.274729] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.274731] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.274733] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.274735] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.274737] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.274747] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.274883] pci 0000:00:02.0: [8086:0156] type 00 class 0x030000
[    0.274898] pci 0000:00:02.0: reg 0x10: [mem 0xf7000000-0xf73fffff 64bit]
[    0.274905] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.274910] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.275067] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.275097] pci 0000:00:16.0: reg 0x10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[    0.275183] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.275305] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.275330] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f08000-0xf7f083ff]
[    0.275427] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.275546] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.275573] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
[    0.275664] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.275787] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.275890] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.276019] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.276122] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.276244] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.276345] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.276472] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.276499] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff]
[    0.276597] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.276714] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
[    0.276942] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.276966] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.276975] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.276984] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.276994] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.277003] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.277013] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f06000-0xf7f067ff]
[    0.277064] pci 0000:00:1f.2: PME# supported from D3hot
[    0.277173] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.277197] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit]
[    0.277222] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.277417] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.277575] pci 0000:02:00.0: [8086:0892] type 00 class 0x028000
[    0.277708] pci 0000:02:00.0: reg 0x10: [mem 0xf7e00000-0xf7e01fff 64bit]
[    0.278516] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.288189] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.288197] pci 0000:00:1c.2:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.288365] pci 0000:03:00.0: [10ec:5286] type 00 class 0xff0000
[    0.288497] pci 0000:03:00.0: reg 0x10: [mem 0xf7400000-0xf740ffff]
[    0.289195] pci 0000:03:00.0: supports D1 D2
[    0.289197] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.289477] pci 0000:03:00.2: [10ec:8136] type 00 class 0x020000
[    0.289602] pci 0000:03:00.2: reg 0x10: [io  0xe000-0xe0ff]
[    0.289723] pci 0000:03:00.2: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.289801] pci 0000:03:00.2: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.290223] pci 0000:03:00.2: supports D1 D2
[    0.290225] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.300124] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.300130] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.300135] pci 0000:00:1c.3:   bridge window [mem 0xf7400000-0xf7dfffff]
[    0.300142] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[    0.301032] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.301144] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.301254] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.301363] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.301470] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.301578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.301686] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.301794] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.302244] ACPI: EC: interrupt unblocked
[    0.302254] ACPI: EC: event unblocked
[    0.302262] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.302264] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.302540] SCSI subsystem initialized
[    0.302578] libata version 3.00 loaded.
[    0.302578] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.302578] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.302578] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.302578] vgaarb: loaded
[    0.302578] ACPI: bus type USB registered
[    0.302578] usbcore: registered new interface driver usbfs
[    0.302578] usbcore: registered new interface driver hub
[    0.302578] usbcore: registered new device driver usb
[    0.302578] EDAC MC: Ver: 3.0.0
[    0.302578] PCI: Using ACPI for IRQ routing
[    0.304762] PCI: pci_cache_line_size set to 64 bytes
[    0.304872] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.304874] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.304875] e820: reserve RAM buffer [mem 0xd9ae2000-0xdbffffff]
[    0.304877] e820: reserve RAM buffer [mem 0xd9e7f000-0xdbffffff]
[    0.304879] e820: reserve RAM buffer [mem 0xda509000-0xdbffffff]
[    0.304881] e820: reserve RAM buffer [mem 0xdac42000-0xdbffffff]
[    0.304882] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.304884] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.304993] NetLabel: Initializing
[    0.304994] NetLabel:  domain hash size = 128
[    0.304994] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.305012] NetLabel:  unlabeled traffic allowed by default
[    0.305030] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.305030] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.306082] clocksource: Switched to clocksource hpet
[    0.317192] VFS: Disk quotas dquot_6.6.0
[    0.317210] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.317324] AppArmor: AppArmor Filesystem Enabled
[    0.317354] pnp: PnP ACPI init
[    0.317502] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.317509] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.317654] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.317657] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.317659] system 00:01: [io  0xffff] has been reserved
[    0.317662] system 00:01: [io  0xffff] has been reserved
[    0.317664] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.317666] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.317668] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.317670] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.317672] system 00:01: [io  0x3322-0x3323] has been reserved
[    0.317678] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.317711] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.317791] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.317796] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.317829] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.317921] pnp 00:05: Plug and Play ACPI device, IDs STU0606 PNP0f13 (active)
[    0.318029] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.318035] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.318417] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.318420] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.318422] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.318424] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.318426] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.318429] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.318433] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.318435] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.318437] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.318440] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.318442] system 00:07: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.318448] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.318776] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    0.318778] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[    0.318784] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.318861] pnp: PnP ACPI: found 9 devices
[    0.325557] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.325595] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.325612] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.325618] pci 0000:00:1c.2:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.325629] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.325633] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.325639] pci 0000:00:1c.3:   bridge window [mem 0xf7400000-0xf7dfffff]
[    0.325644] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[    0.325652] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.325655] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.325657] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.325659] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.325661] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.325662] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[    0.325665] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[    0.325666] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
[    0.325669] pci_bus 0000:00: resource 12 [mem 0xdfa00000-0xfeafffff window]
[    0.325671] pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.325673] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.325675] pci_bus 0000:03: resource 1 [mem 0xf7400000-0xf7dfffff]
[    0.325677] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
[    0.325810] NET: Registered protocol family 2
[    0.326015] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.326096] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.326173] TCP: Hash tables configured (established 32768 bind 32768)
[    0.326206] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.326223] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.326272] NET: Registered protocol family 1
[    0.326287] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.326814] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.326867] Unpacking initramfs...
[    1.448785] Freeing initrd memory: 54248K
[    1.448799] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.448803] software IO TLB [mem 0xd5ae2000-0xd9ae2000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.449043] Scanning for low memory corruption every 60 seconds
[    1.449804] Initialise system trusted keyrings
[    1.449814] Key type blacklist registered
[    1.449851] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.451258] zbud: loaded
[    1.451879] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.452056] fuse init (API version 7.26)
[    1.453713] Key type asymmetric registered
[    1.453714] Asymmetric key parser 'x509' registered
[    1.453764] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.453797] io scheduler noop registered
[    1.453798] io scheduler deadline registered
[    1.453853] io scheduler cfq registered (default)
[    1.454586] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.454587] vesafb: scrolling: redraw
[    1.454589] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.454602] vesafb: framebuffer at 0xe0000000, mapped to 0x        (ptrval), using 4160k, total 4160k
[    1.454695] Console: switching to colour frame buffer device 170x48
[    1.454719] fb0: VESA VGA frame buffer device
[    1.454737] intel_idle: MWAIT substates: 0x21120
[    1.454738] intel_idle: v0.4.1 model 0x3A
[    1.454821] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.454930] ACPI: AC Adapter [AC] (off-line)
[    1.455003] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.455037] ACPI: Power Button [PWRB]
[    1.455080] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.455104] ACPI: Sleep Button [SLPB]
[    1.455145] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.455166] ACPI: Lid Switch [LID0]
[    1.455208] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.455230] ACPI: Power Button [PWRF]
[    1.455690] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.455773] thermal LNXTHERM:00: registered as thermal_zone0
[    1.455774] ACPI: Thermal Zone [TZ0] (25 C)
[    1.455937] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.456532] ACPI: Battery Slot [BAT0] (battery present)
[    1.458537] Linux agpgart interface v0.103
[    1.460158] loop: module loaded
[    1.460354] libphy: Fixed MDIO Bus: probed
[    1.460356] tun: Universal TUN/TAP device driver, 1.6
[    1.460416] PPP generic driver version 2.4.2
[    1.460503] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.460506] ehci-pci: EHCI PCI platform driver
[    1.460663] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.460671] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.460686] ehci-pci 0000:00:1a.0: debug port 2
[    1.464584] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.464602] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000
[    1.480101] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.480185] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.480188] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.480190] usb usb1: Product: EHCI Host Controller
[    1.480192] usb usb1: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[    1.480193] usb usb1: SerialNumber: 0000:00:1a.0
[    1.480465] hub 1-0:1.0: USB hub found
[    1.480477] hub 1-0:1.0: 2 ports detected
[    1.480857] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.480869] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.480885] ehci-pci 0000:00:1d.0: debug port 2
[    1.484787] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.484803] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000
[    1.500102] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.500167] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.500169] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.500171] usb usb2: Product: EHCI Host Controller
[    1.500173] usb usb2: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[    1.500175] usb usb2: SerialNumber: 0000:00:1d.0
[    1.500449] hub 2-0:1.0: USB hub found
[    1.500460] hub 2-0:1.0: 2 ports detected
[    1.500641] ehci-platform: EHCI generic platform driver
[    1.500659] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.500666] ohci-pci: OHCI PCI platform driver
[    1.500680] ohci-platform: OHCI generic platform driver
[    1.500690] uhci_hcd: USB Universal Host Controller Interface driver
[    1.500780] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SENM] at 0x60,0x64 irq 1,12
[    1.505133] i8042: Detected active multiplexing controller, rev 1.1
[    1.506740] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.506746] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.506779] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.506804] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.506829] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.507158] mousedev: PS/2 mouse device common for all mice
[    1.507702] rtc rtc0: invalid alarm value: 2018-9-18 10:61:0
[    1.507760] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.507790] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.507800] i2c /dev entries driver
[    1.507858] device-mapper: uevent: version 1.0.3
[    1.507935] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.507941] intel_pstate: Intel P-state driver initializing
[    1.508034] ledtrig-cpu: registered to indicate activity on CPUs
[    1.508460] NET: Registered protocol family 10
[    1.509797] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.513977] Segment Routing with IPv6
[    1.514008] NET: Registered protocol family 17
[    1.514055] Key type dns_resolver registered
[    1.514266] RAS: Correctable Errors collector initialized.
[    1.514302] microcode: sig=0x306a9, pf=0x10, revision=0x19
[    1.514353] microcode: Microcode Update Driver: v2.2.
[    1.514365] sched_clock: Marking stable (1514347908, 0)->(1504624285, 9723623)
[    1.514595] registered taskstats version 1
[    1.514603] Loading compiled-in X.509 certificates
[    1.518178] Loaded X.509 cert 'Build time autogenerated kernel key: 8913afd7ddd720f2373ea1fd4682d5c61bc68142'
[    1.518202] zswap: loaded using pool lzo/zbud
[    1.522961] Key type big_key registered
[    1.522965] Key type trusted registered
[    1.525293] Key type encrypted registered
[    1.525297] AppArmor: AppArmor sha1 policy hashing enabled
[    1.525299] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.525305] ima: Allocated hash algorithm: sha1
[    1.525325] evm: HMAC attrs: 0x1
[    1.525619]   Magic number: 2:666:780
[    1.525729] rtc_cmos 00:02: setting system clock to 2018-09-18 10:47:00 UTC (1537267620)
[    1.525791] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.525792] EDD information not available.
[    1.528676] Freeing unused kernel memory: 2408K
[    1.548114] Write protecting the kernel read-only data: 20480k
[    1.548844] Freeing unused kernel memory: 2008K
[    1.554492] Freeing unused kernel memory: 1888K
[    1.565671] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.565671] x86/mm: Checking user space page tables
[    1.577348] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.594417] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.594537] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.594556] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.701314] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.701324] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
[    1.702290] ahci 0000:00:1f.2: version 3.0
[    1.702343] r8169 0000:03:00.2 eth0: RTL8402 at 0x        (ptrval), 00:90:f5:f6:e5:db, XID 04000800 IRQ 25
[    1.702518] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    1.702522] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.715941] scsi host0: ahci
[    1.724086] scsi host1: ahci
[    1.724523] scsi host2: ahci
[    1.732058] scsi host3: ahci
[    1.732126] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 26
[    1.732128] ata2: DUMMY
[    1.732129] ata3: DUMMY
[    1.732130] ata4: DUMMY
[    1.755835] r8169 0000:03:00.2 enp3s0f2: renamed from eth0
[    1.797903] [drm] Memory usable by graphics device = 2048M
[    1.797906] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    1.797907] fb: switching to inteldrmfb from VESA VGA
[    1.797934] Console: switching to colour dummy device 80x25
[    1.798106] [drm] Replacing VGA console driver
[    1.804197] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.804198] [drm] Driver supports precise vblank timestamp query.
[    1.808223] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.826146] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.828473] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.828702] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.829093] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    1.844109] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.864185] fbcon: inteldrmfb (fb0) is primary device
[    1.864254] Console: switching to colour frame buffer device 170x48
[    1.864281] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.036943] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.036946] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.037010] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.037012] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.037271] hub 2-1:1.0: USB hub found
[    2.037431] hub 1-1:1.0: USB hub found
[    2.037449] hub 2-1:1.0: 4 ports detected
[    2.037612] hub 1-1:1.0: 4 ports detected
[    2.053195] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.059629] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.059634] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.059636] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.065795] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30001, max UDMA/133
[    2.065799] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.072324] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.072328] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.072331] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.078529] ata1.00: configured for UDMA/133
[    2.078891] scsi 0:0:0:0: Direct-Access     ATA      ST500LM012 HN-M5 0001 PQ: 0 ANSI: 5
[    2.079334] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.079482] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.079485] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.079499] sd 0:0:0:0: [sda] Write Protect is off
[    2.079502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.079527] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.137332]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    2.138384] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.360114] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.402856] random: fast init done
[    2.464146] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[    2.464154] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns
[    2.601262] usb 2-1.3: New USB device found, idVendor=8087, idProduct=07da
[    2.601265] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.488204] clocksource: Switched to clocksource tsc
[    3.680122] raid6: sse2x1   gen()  4780 MB/s
[    3.728117] raid6: sse2x1   xor()  3778 MB/s
[    3.776115] raid6: sse2x2   gen()  5967 MB/s
[    3.824116] raid6: sse2x2   xor()  4212 MB/s
[    3.872116] raid6: sse2x4   gen()  6948 MB/s
[    3.920116] raid6: sse2x4   xor()  5111 MB/s
[    3.920117] raid6: using algorithm sse2x4 gen() 6948 MB/s
[    3.920118] raid6: .... xor() 5111 MB/s, rmw enabled
[    3.920119] raid6: using ssse3x2 recovery algorithm
[    4.007994] xor: measuring software checksum speed
[    4.044111]    prefetch64-sse:  9479.000 MB/sec
[    4.084110]    generic_sse:  8690.000 MB/sec
[    4.084111] xor: using function: prefetch64-sse (9479.000 MB/sec)
[    4.124753] Btrfs loaded, crc32c=crc32c-intel
[    4.645564] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.781399] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.800295] systemd[1]: Detected architecture x86-64.
[    5.806436] systemd[1]: Set hostname to <laptop>.
[    5.916135] psmouse serio2: sentelic: Finger Sensing Pad, hw: 14.4.1, sn: 69171, sw: 1.1.0-K
[    5.917354] random: crng init done
[    5.917356] random: 7 urandom warning(s) missed due to ratelimiting
[    6.135882] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input10
[    8.074382] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.074704] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.074749] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.074763] systemd[1]: Reached target User and Group Name Lookups.
[    8.074826] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    8.074960] systemd[1]: Created slice System Slice.
[    8.075031] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.716193] lp: driver loaded but no devices found
[    8.842459] ppdev: user-space parallel port driver
[   18.834558] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   18.867888] systemd-journald[336]: Received request to flush runtime journal from PID 1
[   19.253764] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   19.253773] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.253776] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   19.253781] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.253782] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   19.253786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.253787] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   19.253792] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.253793] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   19.373139] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.431251] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   19.437635] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   19.607614] Intel(R) Wireless WiFi driver for Linux
[   19.607615] Copyright(c) 2003- 2015 Intel Corporation
[   19.607894] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   19.608042] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   19.608044] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   19.608045] RAPL PMU: hw unit of domain package 2^-16 Joules
[   19.608046] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   20.155625] intel_rapl: Found RAPL domain package
[   20.155627] intel_rapl: Found RAPL domain core
[   20.155628] intel_rapl: Found RAPL domain uncore
[   20.155634] intel_rapl: RAPL package 0 domain package locked by BIOS
[   20.253453] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   20.346025] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   20.346028] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   20.346029] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   20.346032] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 135 BGN, REV=0x120
[   20.441040] Adding 1998844k swap on /dev/sda5.  Priority:-2 extents:1 across:1998844k FS
[   20.542713] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   20.544552] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   20.705162] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   20.801050] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   20.841820] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[   20.841824] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.841826] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
[   20.841828] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[   20.841829] snd_hda_codec_via hdaudioC0D0:    inputs:
[   20.841832] snd_hda_codec_via hdaudioC0D0:      Mic=0x2b
[   20.841834] snd_hda_codec_via hdaudioC0D0:      Internal Mic=0x29
[   20.939756] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   20.939823] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   20.939883] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   20.974912] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   21.274315] Bluetooth: Core ver 2.22
[   21.274336] NET: Registered protocol family 31
[   21.274337] Bluetooth: HCI device and connection manager initialized
[   21.274341] Bluetooth: HCI socket layer initialized
[   21.274344] Bluetooth: L2CAP socket layer initialized
[   21.274350] Bluetooth: SCO socket layer initialized
[   21.505848] usbcore: registered new interface driver btusb
[   21.544310] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   22.103864] audit: type=1400 audit(1537267641.070:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=784 comm="apparmor_parser"
[   22.103870] audit: type=1400 audit(1537267641.070:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=784 comm="apparmor_parser"
[   22.103873] audit: type=1400 audit(1537267641.070:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=784 comm="apparmor_parser"
[   22.103876] audit: type=1400 audit(1537267641.070:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=784 comm="apparmor_parser"
[   22.104802] audit: type=1400 audit(1537267641.074:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=783 comm="apparmor_parser"
[   22.104805] audit: type=1400 audit(1537267641.074:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=783 comm="apparmor_parser"
[   22.105794] audit: type=1400 audit(1537267641.074:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=785 comm="apparmor_parser"
[   22.108727] audit: type=1400 audit(1537267641.078:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=788 comm="apparmor_parser"
[   22.110149] audit: type=1400 audit(1537267641.078:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=789 comm="apparmor_parser"
[   22.115725] audit: type=1400 audit(1537267641.082:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=790 comm="apparmor_parser"
[   22.201122] new mount options do not match the existing superblock, will be ignored
[   22.533937] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.533939] Bluetooth: BNEP filters: protocol multicast
[   22.533943] Bluetooth: BNEP socket layer initialized
[   27.946923] Non-volatile memory driver v1.3
[   28.277614] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   28.291681] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x0
[   28.389934] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x0
[   28.450262] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   28.455351] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[   28.757519] r8169 0000:03:00.2 enp3s0f2: link down
[   28.757598] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[   29.532763] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   35.196089] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[   35.307515] usb 1-1.2: New USB device found, idVendor=2717, idProduct=0368
[   35.307518] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   35.307520] usb 1-1.2: Product: MI 4LTE
[   35.307522] usb 1-1.2: Manufacturer: Android
[   35.307524] usb 1-1.2: SerialNumber: 8fabc58b
[   35.880498] usb-storage 1-1.2:1.1: USB Mass Storage device detected
[   35.880636] scsi host4: usb-storage 1-1.2:1.1
[   35.880971] usbcore: registered new interface driver usb-storage
[   35.893797] usbcore: registered new interface driver uas
[   38.325185] usb 1-1.2: USB disconnect, device number 3
[   47.059933] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[   47.170884] usb 1-1.2: New USB device found, idVendor=2717, idProduct=0368
[   47.170888] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   47.170890] usb 1-1.2: Product: MI 4LTE
[   47.170892] usb 1-1.2: Manufacturer: Android
[   47.170894] usb 1-1.2: SerialNumber: 8fabc58b
[   47.173051] usb-storage 1-1.2:1.1: USB Mass Storage device detected
[   47.173227] scsi host4: usb-storage 1-1.2:1.1
[   54.071099] wlp2s0: authenticate with a8:9d:21:be:95:30
[   54.080252] wlp2s0: send auth to a8:9d:21:be:95:30 (try 1/3)
[   54.082021] wlp2s0: authenticated
[   54.087824] wlp2s0: associate with a8:9d:21:be:95:30 (try 1/3)
[   54.115952] wlp2s0: RX AssocResp from a8:9d:21:be:95:30 (capab=0x431 status=0 aid=7)
[   54.141739] wlp2s0: associated
[   54.178426] wlp2s0: Limiting TX power to 16 dBm as advertised by a8:9d:21:be:95:30
[   54.384648] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   55.363911] usb 1-1.2: USB disconnect, device number 4
[   61.527782] Bluetooth: RFCOMM TTY layer initialized
[   61.527788] Bluetooth: RFCOMM socket layer initialized
[   61.527794] Bluetooth: RFCOMM ver 1.11
[   75.599628] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[   75.709983] usb 1-1.2: New USB device found, idVendor=2717, idProduct=0368
[   75.709986] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   75.709989] usb 1-1.2: Product: MI 4LTE
[   75.709991] usb 1-1.2: Manufacturer: Xiaomi
[   75.709992] usb 1-1.2: SerialNumber: 8fabc58b
[   75.710943] usb-storage 1-1.2:1.1: USB Mass Storage device detected
[   75.711556] scsi host4: usb-storage 1-1.2:1.1
[  151.012475] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[  151.125253] usb 1-1.2: device firmware changed
[  151.125752] usb 1-1.2: USB disconnect, device number 5
[  151.368314] usb 1-1.2: new high-speed USB device number 6 using ehci-pci
[  151.477423] usb 1-1.2: New USB device found, idVendor=2717, idProduct=0388
[  151.477426] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  151.477428] usb 1-1.2: Product: MI 4LTE
[  151.477430] usb 1-1.2: Manufacturer: Xiaomi
[  151.477432] usb 1-1.2: SerialNumber: 8fabc58b
[  152.123424] usbcore: registered new interface driver cdc_ether
[  152.128424] rndis_host 1-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1a.0-1.2, RNDIS device, a6:93:5d:27:db:d4
[  152.128515] usbcore: registered new interface driver rndis_host
[  152.138533] rndis_host 1-1.2:1.0 enp0s26u1u2: renamed from usb0
[  152.170192] IPv6: ADDRCONF(NETDEV_UP): enp0s26u1u2: link is not ready
[  660.598097] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[  660.710525] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c077
[  660.710533] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  660.710538] usb 2-1.2: Product: USB Optical Mouse
[  660.710558] usb 2-1.2: Manufacturer: Logitech
[  661.407362] hidraw: raw HID events driver (C) Jiri Kosina
[  661.542198] usbcore: registered new interface driver usbhid
[  661.542201] usbhid: USB HID core driver
[  661.555606] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C077.0001/input/input17
[  661.556041] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[ 1312.026395] usb 1-1.2: USB disconnect, device number 6
[ 1312.028622] rndis_host 1-1.2:1.0 enp0s26u1u2: unregister 'rndis_host' usb-0000:00:1a.0-1.2, RNDIS device
[ 1312.314125] usb 1-1.2: new high-speed USB device number 7 using ehci-pci
[ 1312.423654] usb 1-1.2: New USB device found, idVendor=2717, idProduct=0368
[ 1312.423662] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1312.423667] usb 1-1.2: Product: MI 4LTE
[ 1312.423671] usb 1-1.2: Manufacturer: Xiaomi
[ 1312.423675] usb 1-1.2: SerialNumber: 8fabc58b
[ 1312.425675] usb-storage 1-1.2:1.1: USB Mass Storage device detected
[ 1312.428598] scsi host4: usb-storage 1-1.2:1.1
[ 1313.306712] usb 1-1.2: USB disconnect, device number 7
[ 1316.470119] usb 1-1.2: new high-speed USB device number 8 using ehci-pci
[ 1316.584064] usb 1-1.2: New USB device found, idVendor=2717, idProduct=0368
[ 1316.584071] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1316.584075] usb 1-1.2: Product: MI 4LTE
[ 1316.584079] usb 1-1.2: Manufacturer: Xiaomi
[ 1316.584083] usb 1-1.2: SerialNumber: 8fabc58b
[ 1316.588124] usb-storage 1-1.2:1.1: USB Mass Storage device detected
[ 1316.588505] scsi host4: usb-storage 1-1.2:1.1
[ 1319.082233] usb 1-1.2: USB disconnect, device number 8
[ 1319.474175] usb 1-1.2: new high-speed USB device number 9 using ehci-pci
[ 1319.584042] usb 1-1.2: New USB device found, idVendor=2717, idProduct=0388
[ 1319.584050] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1319.584054] usb 1-1.2: Product: MI 4LTE
[ 1319.584058] usb 1-1.2: Manufacturer: Xiaomi
[ 1319.584062] usb 1-1.2: SerialNumber: 8fabc58b
[ 1319.588508] rndis_host 1-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1a.0-1.2, RNDIS device, be:55:49:d4:c9:12
[ 1320.141999] rndis_host 1-1.2:1.0 enp0s26u1u2: renamed from usb0
[ 1320.167468] IPv6: ADDRCONF(NETDEV_UP): enp0s26u1u2: link is not ready

Et non, aucune interface ne s’affiche sur le téléphone.

+0 -0

Hum, il y a énormément d’information ! J’aurais du préciser que seules les lignes relatives au portable (donc la fin) et éventuellement le début étaient intéressantes mais peu importe. D’ailleurs, quand je parlais d’interface, je voulais parler d’interfaces ethernets (on obtient la liste avec ip a) sur le PC, je me suis mal exprimé >_<" . Mais bon, on a toutes les informations !

On voit qu’il y a plusieurs :

IPv6: ADDRCONF(NETDEV_UP): enp0s26u1u2: link is not ready

On voit également qu’il y a bien une interface qui s’affiche du coté PC : "enp0s26u1u2: renamed from usb0". Et que c’est elle qui a ensuite un problème.

Le problème c’est que c’est une erreur assez générique. Ça peut venir d’un problème de câble comme ça peut venir d’un problème de driver.

À première vue, je dirais que ça vient du téléphone qui a un problème par exemple avec son serveur DHCP.

+0 -0

OK. Parce que quand je fais IP A j’ai :

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp3s0f2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
    link/ether 00:90:f5:f6:e5:db brd ff:ff:ff:ff:ff:ff
3: wlp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 0c:d2:92:c2:5b:00 brd ff:ff:ff:ff:ff:ff
5: enp0s26u1u2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
    link/ether be:55:49:d4:c9:12 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::dbb8:d432:5b8a:e359/64 scope link 
       valid_lft forever preferred_lft forever

Loopback, j’ai l’impression que ça tourne en rond. Comment tester le téléphone pour résoudre le problème ?

+0 -0

OK, j’ai farfouillé, et la piste du DHCP me semble bonne :

Dans options supplémentaires -> Options pour les développeurs, j’ai coché « use legacy DHCP client (use the dhcp client from lollipop instead of the new android DHCP client », et ça marche.

Après investigation, je sais pourquoi il y a problème : j’ai installé l’application « PirateBox » qui m’a modifié le DHCP (en me faisant un backup avec le fichier dnsmasq.pb.backup dans /system/bin/). Je sais juste pas comment restaurer ce fichier (avec ADB ? Comment ?).

+0 -0

Désolé :/

Niveau Android, mon niveau est largement dépassé ^^"

Je dirais réinstalle une ROM mais franchement il y a certainement moins radicale ^^"

Edit:

Pardon ! J’avais pas lu la fin de ton message ! >_<"

Oui adb semble idéal. Un adb root puis adb shell devrait te donner les droits root sur le téléphone de manière temporaire (si le téléphone est root, normalement, avec un shell normal tu tâpes juste su et tu as le même résultat). Pour installer adb sous ArchLinux : adb la procédure devrait être à peu près semblable pour Mint … J’espère ^^"

Après, c’est juste une histoire de mv. Certainement que le fichier de configuration de dnsmasq (dnsmasq.conf) est dans /etc/ ou un équivalent android que je ne connais pas qui doit être du type : /sys/etc/.

Bonne chance :)

+0 -0

J’ai déjà remarqué sur un PC un problème pour se reconnecter à internet quand on débranchait le cable ethernet.

Je devais soit redémarrer le PC, soit desactivé et réactivé le pilote de ma carte réseau. :/ Source:A-312

J’ai déjà remarqué sur un PC un problème pour se reconnecter à internet quand on débranchait le cable ethernet.

Je devais soit redémarrer le PC, soit desactivé et réactivé le pilote de ma carte réseau. :/

A-312

Je connectant à d’autres wifi et d’autres cables ethernet, ça semble marcher. Le problème ne vient qu’avec le téléphone.

+0 -0

Bon, en cherchant, j’ai déduit que le reset usine ne pourrait pas marcher. J’ai donc installé la rom de mon téléphone (mise à jour). Ca semble marcher pour le wifi (je vous parle avec ça) et l’USB.

ÉDIT :

Je récapitule :

  1. l’application PirateBox a foutu la merde sur mon dnsmasq, empêchant de me connecter à Internet (normal) : à réserver aux vieux smartphone ;
  2. pour corriger ce problème, j’ai du mettre à jour mon OS, pour écraser mon vieux dnsmasq. J’aurais pu réinstaller la même ROM, mais autant profiter de faire une MAJ.
+0 -0
Connectez-vous pour pouvoir poster un message.
Connexion

Pas encore membre ?

Créez un compte en une minute pour profiter pleinement de toutes les fonctionnalités de Zeste de Savoir. Ici, tout est gratuit et sans publicité.
Créer un compte